如果您正在使用自定义配置，您可以按照警告中的建议，将Pod配置包含在配置文件中

     #include "Pods/Target Support Files/Pods-YYY/Pods-YYYY.develop-archive.xcconfig"

这将不会停止警告，但将允许您使用您的私人配置(在CocoaPods项目的警告上有一个开放的错误) https://github.com/CocoaPods/CocoaPods/issues/2633

也遇到了同样的问题。它可以建立在模拟器上，但不是在我的设备上。没有一个答案能帮我解决这个问题。以下是我将一些答案拼凑在一起的方法:

Changed my pods file to use a specific target: target :MyProject do pod 'AWSCognitoSync' pod 'Facebook-iOS-SDK' end Ran pod install That gives an error: [!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `MyProject` to `Pods/Target Support Files/Pods-MyProject/Pods-MyProject.debug.xcconfig` or include the `Pods/Target Support Files/Pods-MyProject/Pods-MyProject.debug.xcconfig` in your build configuration. Go Project settings and click on Info tab. There will be an error where it cannot find the Configuration file. Set it to "None" for Debug and Release. Run pod install yet again Clean and build. This works.

这发生在我身上是因为我已经有了Pod配置。我是iOS开发的新手，在搜索安装Alamofire + SwiftyJSON的说明时，无意中安装了不止一次库。对我来说，起作用的是:在“Pods”项目的“目标支持文件”文件夹中，我选择了两个正确的。xcconfig文件，并将它们拖到我的应用程序项目的“Pods”文件夹中。这允许在基本配置上选择正确的配置文件。

但是，如果我再次运行“pod install”，警告将更改为先前的.xcconfig文件。我试图从主项目中删除文件和旧的框架，但当我再次运行前面的命令时，给了我同样的警告，并在我的应用程序项目的“Pods”文件夹下创建文件“Pods.framework”。我忽略了它，尽管有两个框架，但它似乎运行正常。我不知道这是否正确，如果存在解决方案，它将受到欢迎。

这是我在运行pod安装或pod更新后得到的消息:

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig` in your build configuration (`Flutter/Debug.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig` in your build configuration (`Flutter/Release.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig` in your build configuration (`Flutter/Release.xcconfig`).

下面是我解决这个问题的方法:

将方案添加到项目“Runner”下的Podfile

project 'Runner', {
  'Debug' => :debug,
  'Debug-staging' => :debug,
  'Profile' => :release,
  'Profile-staging' => :release,
  'Release' => :release,
  'Release-staging' => :release,
}

进入ios/颤振/调试。Xcconfig和include

#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig"

进入ios/Flutter/Release。Xcconfig和include

#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig"
#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig"

颤振清洁 删除podfile.lock 酒吧得到 圆荚体安装

播客文件中产生问题的行是:link_with ['BluePlaquesLondon'， 'BluePlaquesLondonFramework']。

只是让这个:link_with ['BluePlaquesLondon']或这个(在我的情况下工作，希望它会在你的:-)):

source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '8.0'

xcodeproj 'BluePlaquesLondon.xcodeproj'
inhibit_all_warnings!
link_with ['BluePlaquesLondon']

def import_pods

     pod 'TTTAttributedLabel', '~> 1.10.1'
     pod 'GoogleAnalytics-iOS-SDK', '~> 3.0.9'
     pod 'Google-Maps-iOS-SDK'
     pod 'IntentKit'
     pod 'HCViews'
     pod 'SVProgressHUD', :head
     pod 'iRate'
     pod 'iOS-KML-Framework', :git => 'https://github.com/FLCLjp/iOS-KML-Framework.git'

end

import_pods

target "BluePlaquesLondonFramework" do
    import_pods
    pod 'Kiwi'
end

进入XCode，打开你的项目设置，在信息选项卡下，你会看到“配置”，在这里你可以设置调试和发布的配置文件。显然，您已经将这些设置为一些自定义配置，CocoaPods希望/需要您使用Pods配置。