我把pod文件里的pod从目标移到了外面。文件更改如下:

# Uncomment this line to define a global platform for your project
# platform :ios, '8.0'
# Uncomment this line if you're using Swift
use_frameworks!

target 'MyProject' do

pod 'Firebase', '>= 2.5.0'
pod 'Onboard'
pod 'GoogleMaps'
pod 'IQDropDownTextField'

end

:

# Uncomment this line to define a global platform for your project
# platform :ios, '8.0'
# Uncomment this line if you're using Swift
use_frameworks!

pod 'Firebase', '>= 2.5.0'
pod 'Onboard'
pod 'GoogleMaps'
pod 'IQDropDownTextField'

target 'MyProject' do

end

我也遇到了同样的问题，但是在Xcode 6.1.1中-为我修复它的是将两个pod相关目标的配置文件设置更改为None，然后再次运行pod install。

通过选择项目(而不是目标)，然后选择Info选项卡，可以找到配置文件设置。

这是我在运行pod安装或pod更新后得到的消息:

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig` in your build configuration (`Flutter/Debug.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig` in your build configuration (`Flutter/Release.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig` in your build configuration (`Flutter/Release.xcconfig`).

下面是我解决这个问题的方法:

将方案添加到项目“Runner”下的Podfile

project 'Runner', {
  'Debug' => :debug,
  'Debug-staging' => :debug,
  'Profile' => :release,
  'Profile-staging' => :release,
  'Release' => :release,
  'Release-staging' => :release,
}

进入ios/颤振/调试。Xcconfig和include

#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig"

进入ios/Flutter/Release。Xcconfig和include

#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig"
#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig"

颤振清洁 删除podfile.lock 酒吧得到 圆荚体安装

我错了:

diff: /../Podfile.lock: No such file or directory diff: /Manifest.lock: No such file or directory error: The sandbox is not in sync with the Podfile.lock.

我只是检查了我安装吊舱的路径，并纠正了它，重新安装，它只是工作。

确保在.xcodeproj或.xcworkspace(如果已经存在的话)存在的位置前面给出路径。

也遇到了同样的问题。它可以建立在模拟器上，但不是在我的设备上。没有一个答案能帮我解决这个问题。以下是我将一些答案拼凑在一起的方法:

Changed my pods file to use a specific target: target :MyProject do pod 'AWSCognitoSync' pod 'Facebook-iOS-SDK' end Ran pod install That gives an error: [!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `MyProject` to `Pods/Target Support Files/Pods-MyProject/Pods-MyProject.debug.xcconfig` or include the `Pods/Target Support Files/Pods-MyProject/Pods-MyProject.debug.xcconfig` in your build configuration. Go Project settings and click on Info tab. There will be an error where it cannot find the Configuration file. Set it to "None" for Debug and Release. Run pod install yet again Clean and build. This works.

别瞎捣鼓了，重置。

循序渐进的

显示项目导航器 选择项目 选择信息 在Configurations中，选择每个目标，一次一个(Debug, ApplicationUnitTest, Release，等等)，对于每个目标，将configuration设置为None。 确保“基于配置文件”为每个配置读取0配置集或无配置集。这是关键所在。 Xcode辞职 rm -rf Pods/ Podfile。锁;圆荚体安装

一旦你允许pod安装在第7步中发挥它的魔力，你就可以使用自定义配置并更改配置。