考虑使用Spring安全加密模块

Spring Security Crypto模块提供对对称加密、密钥生成和密码编码的支持。该代码作为核心模块的一部分分发，但不依赖于任何其他Spring Security(或Spring)代码。

它为加密提供了一个简单的抽象，似乎与这里的要求相匹配，

“标准”加密方法是使用PKCS #5的PBKDF2(基于密码的密钥推导函数#2)的256位AES。此方法需要Java 6。用于生成SecretKey的密码应保存在安全的地方，不能被共享。在加密数据被泄露的情况下，salt用于防止针对密钥的字典攻击。还应用了一个16字节的随机初始化向量，因此每个加密消息都是唯一的。

内部结构与埃里克森的答案相似。

正如问题中所指出的，这也需要Java加密扩展(JCE)无限强度管辖策略(否则您将遇到InvalidKeyException:非法密钥大小)。它可以在Java 6、Java 7和Java 8上下载。

示例使用

import org.springframework.security.crypto.encrypt.Encryptors;
import org.springframework.security.crypto.encrypt.TextEncryptor;
import org.springframework.security.crypto.keygen.KeyGenerators;

public class CryptoExample {
    public static void main(String[] args) {
        final String password = "I AM SHERLOCKED";  
        final String salt = KeyGenerators.string().generateKey();
        
        TextEncryptor encryptor = Encryptors.text(password, salt);      
        System.out.println("Salt: \"" + salt + "\"");
        
        String textToEncrypt = "*royal secrets*";
        System.out.println("Original text: \"" + textToEncrypt + "\"");
        
        String encryptedText = encryptor.encrypt(textToEncrypt);
        System.out.println("Encrypted text: \"" + encryptedText + "\"");
        
        // Could reuse encryptor but wanted to show reconstructing TextEncryptor
        TextEncryptor decryptor = Encryptors.text(password, salt);
        String decryptedText = decryptor.decrypt(encryptedText);
        System.out.println("Decrypted text: \"" + decryptedText + "\"");
        
        if(textToEncrypt.equals(decryptedText)) {
            System.out.println("Success: decrypted text matches");
        } else {
            System.out.println("Failed: decrypted text does not match");
        }       
    }
}

样本输出，

Salt: "feacbc02a3a697b0"
Original text: "*royal secrets*"
Encrypted text: "7c73c5a83fa580b5d6f8208768adc931ef3123291ac8bc335a1277a39d256d9a" 
Decrypted text: "*royal secrets*"
Success: decrypted text matches

与带外的接收者共享密码(一个char[])和盐(一个字节[]-由securerrandom选择的8个字节构成一个好的盐——不需要保密)。然后从这些信息中推导出一个好的关键字:

/* Derive the key, given password and salt. */
SecretKeyFactory factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA256");
KeySpec spec = new PBEKeySpec(password, salt, 65536, 256);
SecretKey tmp = factory.generateSecret(spec);
SecretKey secret = new SecretKeySpec(tmp.getEncoded(), "AES");

魔术数字(可以在某处定义为常数)65536和256分别是密钥派生迭代计数和密钥大小。

密钥推导函数的迭代需要大量的计算工作，这防止了攻击者快速尝试许多不同的密码。迭代计数可以根据可用的计算资源进行更改。

密钥大小可以减少到128位，这仍然被认为是“强”加密，但如果发现攻击削弱了AES，它并没有提供太多的安全边际。

Used with a proper block-chaining mode, the same derived key can be used to encrypt many messages. In Cipher Block Chaining (CBC), a random initialization vector (IV) is generated for each message, yielding different cipher text even if the plain text is identical. CBC may not be the most secure mode available to you (see AEAD below); there are many other modes with different security properties, but they all use a similar random input. In any case, the outputs of each encryption operation are the cipher text and the initialization vector:

/* Encrypt the message. */
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.ENCRYPT_MODE, secret);
AlgorithmParameters params = cipher.getParameters();
byte[] iv = params.getParameterSpec(IvParameterSpec.class).getIV();
byte[] ciphertext = cipher.doFinal("Hello, World!".getBytes(StandardCharsets.UTF_8));

存储密文和iv。在解密时，SecretKey以完全相同的方式重新生成，使用使用具有相同salt和迭代参数的密码。初始化密码与此密钥和初始化向量存储的消息:

/* Decrypt the message, given derived key and initialization vector. */
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, secret, new IvParameterSpec(iv));
String plaintext = new String(cipher.doFinal(ciphertext), StandardCharsets.UTF_8);
System.out.println(plaintext);

Java 7包含了对AEAD密码模式的API支持，OpenJDK和Oracle发行版中包含的“SunJCE”提供者从Java 8开始实现了这些。强烈推荐其中一种模式来代替CBC;它将保护数据的完整性以及他们的隐私。

带有“非法密钥大小或默认参数”消息的java.security.InvalidKeyException意味着加密强度是有限的;无限强度权限策略文件不在正确的位置。在JDK中，它们应该放在${JDK}/jre/lib/security下

根据问题描述，似乎没有正确安装策略文件。系统可以很容易地拥有多个Java运行时;仔细检查以确保使用了正确的位置。

添加到@Wufoo的编辑，下面的版本使用InputStreams而不是文件，使工作与各种文件更容易。它还将IV和Salt存储在文件的开头，这样就只需要跟踪密码。由于IV和Salt不需要保密，这使生活更容易一些。

import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;

import java.security.AlgorithmParameters;
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;
import java.security.SecureRandom;
import java.security.spec.InvalidKeySpecException;
import java.security.spec.InvalidParameterSpecException;
import java.security.spec.KeySpec;

import java.util.logging.Level;
import java.util.logging.Logger;

import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.CipherInputStream;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.SecretKeySpec;

public class AES {
    public final static int SALT_LEN     = 8;
    static final String     HEXES        = "0123456789ABCDEF";
    String                  mPassword    = null;
    byte[]                  mInitVec     = null;
    byte[]                  mSalt        = new byte[SALT_LEN];
    Cipher                  mEcipher     = null;
    Cipher                  mDecipher    = null;
    private final int       KEYLEN_BITS  = 128;    // see notes below where this is used.
    private final int       ITERATIONS   = 65536;
    private final int       MAX_FILE_BUF = 1024;

    /**
     * create an object with just the passphrase from the user. Don't do anything else yet
     * @param password
     */
    public AES(String password) {
        mPassword = password;
    }

    public static String byteToHex(byte[] raw) {
        if (raw == null) {
            return null;
        }

        final StringBuilder hex = new StringBuilder(2 * raw.length);

        for (final byte b : raw) {
            hex.append(HEXES.charAt((b & 0xF0) >> 4)).append(HEXES.charAt((b & 0x0F)));
        }

        return hex.toString();
    }

    public static byte[] hexToByte(String hexString) {
        int    len = hexString.length();
        byte[] ba  = new byte[len / 2];

        for (int i = 0; i < len; i += 2) {
            ba[i / 2] = (byte) ((Character.digit(hexString.charAt(i), 16) << 4)
                                + Character.digit(hexString.charAt(i + 1), 16));
        }

        return ba;
    }

    /**
     * debug/print messages
     * @param msg
     */
    private void Db(String msg) {
        System.out.println("** Crypt ** " + msg);
    }

    /**
     * This is where we write out the actual encrypted data to disk using the Cipher created in setupEncrypt().
     * Pass two file objects representing the actual input (cleartext) and output file to be encrypted.
     *
     * there may be a way to write a cleartext header to the encrypted file containing the salt, but I ran
     * into uncertain problems with that.
     *
     * @param input - the cleartext file to be encrypted
     * @param output - the encrypted data file
     * @throws IOException
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     */
    public void WriteEncryptedFile(InputStream inputStream, OutputStream outputStream)
            throws IOException, IllegalBlockSizeException, BadPaddingException {
        try {
            long             totalread = 0;
            int              nread     = 0;
            byte[]           inbuf     = new byte[MAX_FILE_BUF];
            SecretKeyFactory factory   = null;
            SecretKey        tmp       = null;

            // crate secureRandom salt and store  as member var for later use
            mSalt = new byte[SALT_LEN];

            SecureRandom rnd = new SecureRandom();

            rnd.nextBytes(mSalt);
            Db("generated salt :" + byteToHex(mSalt));
            factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");

            /*
             *  Derive the key, given password and salt.
             *
             * in order to do 256 bit crypto, you have to muck with the files for Java's "unlimted security"
             * The end user must also install them (not compiled in) so beware.
             * see here:  http://www.javamex.com/tutorials/cryptography/unrestricted_policy_files.shtml
             */
            KeySpec spec = new PBEKeySpec(mPassword.toCharArray(), mSalt, ITERATIONS, KEYLEN_BITS);

            tmp = factory.generateSecret(spec);

            SecretKey secret = new SecretKeySpec(tmp.getEncoded(), "AES");

            /*
             *  Create the Encryption cipher object and store as a member variable
             */
            mEcipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
            mEcipher.init(Cipher.ENCRYPT_MODE, secret);

            AlgorithmParameters params = mEcipher.getParameters();

            // get the initialization vectory and store as member var
            mInitVec = params.getParameterSpec(IvParameterSpec.class).getIV();
            Db("mInitVec is :" + byteToHex(mInitVec));
            outputStream.write(mSalt);
            outputStream.write(mInitVec);

            while ((nread = inputStream.read(inbuf)) > 0) {
                Db("read " + nread + " bytes");
                totalread += nread;

                // create a buffer to write with the exact number of bytes read. Otherwise a short read fills inbuf with 0x0
                // and results in full blocks of MAX_FILE_BUF being written.
                byte[] trimbuf = new byte[nread];

                for (int i = 0; i < nread; i++) {
                    trimbuf[i] = inbuf[i];
                }

                // encrypt the buffer using the cipher obtained previosly
                byte[] tmpBuf = mEcipher.update(trimbuf);

                // I don't think this should happen, but just in case..
                if (tmpBuf != null) {
                    outputStream.write(tmpBuf);
                }
            }

            // finalize the encryption since we've done it in blocks of MAX_FILE_BUF
            byte[] finalbuf = mEcipher.doFinal();

            if (finalbuf != null) {
                outputStream.write(finalbuf);
            }

            outputStream.flush();
            inputStream.close();
            outputStream.close();
            outputStream.close();
            Db("wrote " + totalread + " encrypted bytes");
        } catch (InvalidKeyException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (InvalidParameterSpecException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (NoSuchAlgorithmException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (NoSuchPaddingException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (InvalidKeySpecException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        }
    }

    /**
     * Read from the encrypted file (input) and turn the cipher back into cleartext. Write the cleartext buffer back out
     * to disk as (output) File.
     *
     * I left CipherInputStream in here as a test to see if I could mix it with the update() and final() methods of encrypting
     *  and still have a correctly decrypted file in the end. Seems to work so left it in.
     *
     * @param input - File object representing encrypted data on disk
     * @param output - File object of cleartext data to write out after decrypting
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     * @throws IOException
     */
    public void ReadEncryptedFile(InputStream inputStream, OutputStream outputStream)
            throws IllegalBlockSizeException, BadPaddingException, IOException {
        try {
            CipherInputStream cin;
            long              totalread = 0;
            int               nread     = 0;
            byte[]            inbuf     = new byte[MAX_FILE_BUF];

            // Read the Salt
            inputStream.read(this.mSalt);
            Db("generated salt :" + byteToHex(mSalt));

            SecretKeyFactory factory = null;
            SecretKey        tmp     = null;
            SecretKey        secret  = null;

            factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");

            KeySpec spec = new PBEKeySpec(mPassword.toCharArray(), mSalt, ITERATIONS, KEYLEN_BITS);

            tmp    = factory.generateSecret(spec);
            secret = new SecretKeySpec(tmp.getEncoded(), "AES");

            /* Decrypt the message, given derived key and initialization vector. */
            mDecipher = Cipher.getInstance("AES/CBC/PKCS5Padding");

            // Set the appropriate size for mInitVec by Generating a New One
            AlgorithmParameters params = mDecipher.getParameters();

            mInitVec = params.getParameterSpec(IvParameterSpec.class).getIV();

            // Read the old IV from the file to mInitVec now that size is set.
            inputStream.read(this.mInitVec);
            Db("mInitVec is :" + byteToHex(mInitVec));
            mDecipher.init(Cipher.DECRYPT_MODE, secret, new IvParameterSpec(mInitVec));

            // creating a decoding stream from the FileInputStream above using the cipher created from setupDecrypt()
            cin = new CipherInputStream(inputStream, mDecipher);

            while ((nread = cin.read(inbuf)) > 0) {
                Db("read " + nread + " bytes");
                totalread += nread;

                // create a buffer to write with the exact number of bytes read. Otherwise a short read fills inbuf with 0x0
                byte[] trimbuf = new byte[nread];

                for (int i = 0; i < nread; i++) {
                    trimbuf[i] = inbuf[i];
                }

                // write out the size-adjusted buffer
                outputStream.write(trimbuf);
            }

            outputStream.flush();
            cin.close();
            inputStream.close();
            outputStream.close();
            Db("wrote " + totalread + " encrypted bytes");
        } catch (Exception ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        }
    }

    /**
     * adding main() for usage demonstration. With member vars, some of the locals would not be needed
     */
    public static void main(String[] args) {

        // create the input.txt file in the current directory before continuing
        File   input   = new File("input.txt");
        File   eoutput = new File("encrypted.aes");
        File   doutput = new File("decrypted.txt");
        String iv      = null;
        String salt    = null;
        AES    en      = new AES("mypassword");

        /*
         * write out encrypted file
         */
        try {
            en.WriteEncryptedFile(new FileInputStream(input), new FileOutputStream(eoutput));
            System.out.printf("File encrypted to " + eoutput.getName() + "\niv:" + iv + "\nsalt:" + salt + "\n\n");
        } catch (IllegalBlockSizeException | BadPaddingException | IOException e) {
            e.printStackTrace();
        }

        /*
         * decrypt file
         */
        AES dc = new AES("mypassword");

        /*
         * write out decrypted file
         */
        try {
            dc.ReadEncryptedFile(new FileInputStream(eoutput), new FileOutputStream(doutput));
            System.out.println("decryption finished to " + doutput.getName());
        } catch (IllegalBlockSizeException | BadPaddingException | IOException e) {
            e.printStackTrace();
        }
    }
}

考虑使用Spring安全加密模块

Spring Security Crypto模块提供对对称加密、密钥生成和密码编码的支持。该代码作为核心模块的一部分分发，但不依赖于任何其他Spring Security(或Spring)代码。

它为加密提供了一个简单的抽象，似乎与这里的要求相匹配，

“标准”加密方法是使用PKCS #5的PBKDF2(基于密码的密钥推导函数#2)的256位AES。此方法需要Java 6。用于生成SecretKey的密码应保存在安全的地方，不能被共享。在加密数据被泄露的情况下，salt用于防止针对密钥的字典攻击。还应用了一个16字节的随机初始化向量，因此每个加密消息都是唯一的。

内部结构与埃里克森的答案相似。

正如问题中所指出的，这也需要Java加密扩展(JCE)无限强度管辖策略(否则您将遇到InvalidKeyException:非法密钥大小)。它可以在Java 6、Java 7和Java 8上下载。

示例使用

import org.springframework.security.crypto.encrypt.Encryptors;
import org.springframework.security.crypto.encrypt.TextEncryptor;
import org.springframework.security.crypto.keygen.KeyGenerators;

public class CryptoExample {
    public static void main(String[] args) {
        final String password = "I AM SHERLOCKED";  
        final String salt = KeyGenerators.string().generateKey();
        
        TextEncryptor encryptor = Encryptors.text(password, salt);      
        System.out.println("Salt: \"" + salt + "\"");
        
        String textToEncrypt = "*royal secrets*";
        System.out.println("Original text: \"" + textToEncrypt + "\"");
        
        String encryptedText = encryptor.encrypt(textToEncrypt);
        System.out.println("Encrypted text: \"" + encryptedText + "\"");
        
        // Could reuse encryptor but wanted to show reconstructing TextEncryptor
        TextEncryptor decryptor = Encryptors.text(password, salt);
        String decryptedText = decryptor.decrypt(encryptedText);
        System.out.println("Decrypted text: \"" + decryptedText + "\"");
        
        if(textToEncrypt.equals(decryptedText)) {
            System.out.println("Success: decrypted text matches");
        } else {
            System.out.println("Failed: decrypted text does not match");
        }       
    }
}

样本输出，

Salt: "feacbc02a3a697b0"
Original text: "*royal secrets*"
Encrypted text: "7c73c5a83fa580b5d6f8208768adc931ef3123291ac8bc335a1277a39d256d9a" 
Decrypted text: "*royal secrets*"
Success: decrypted text matches

考虑使用Encryptor4j，我是它的作者。

首先，确保在继续之前安装了“无限强度管辖策略”文件，以便可以使用256位AES密钥。

然后执行以下步骤:

String password = "mysupersecretpassword"; 
Key key = KeyFactory.AES.keyFromPassword(password.toCharArray());
Encryptor encryptor = new Encryptor(key, "AES/CBC/PKCS7Padding", 16);

您现在可以使用加密器加密您的消息。如果愿意，还可以执行流加密。它会自动生成并预先为您提供安全的静脉注射。

如果这是一个你想要压缩的文件，看看这个答案 使用JAVA使用AES加密大文件是一种更简单的方法。

从字节数组生成你自己的键很简单:

byte[] raw = ...; // 32 bytes in size for a 256 bit key
Key skey = new javax.crypto.spec.SecretKeySpec(raw, "AES");

但是创建一个256位的密钥是不够的。如果密钥生成器不能为您生成256位密钥，那么Cipher类可能也不支持AES 256位。您说您已经安装了无限权限补丁，因此应该支持AES-256密码(但也应该支持256位密钥，因此这可能是一个配置问题)。

Cipher cipher = Cipher.getInstance("AES");
cipher.init(Cipher.ENCRYPT_MODE, skey);
byte[] encrypted = cipher.doFinal(plainText.getBytes());

缺乏AES-256支持的解决方法是采用一些免费的AES-256实现，并将其用作自定义提供程序。这涉及到创建自己的Provider子类并将其与Cipher一起使用。getInstance(字符串,提供者)。但这可能是一个复杂的过程。