Linux键映射来匹配浏览器:

[
    {
        "key": "ctrl+0",
        "command": "workbench.action.lastEditorInGroup"
    },
    {
        "key": "ctrl+1",
        "command": "workbench.action.openEditorAtIndex1"
    },
    {
        "key": "ctrl+2",
        "command": "workbench.action.openEditorAtIndex2"
    },
    {
        "key": "ctrl+3",
        "command": "workbench.action.openEditorAtIndex3"
    },
    {
        "key": "ctrl+4",
        "command": "workbench.action.openEditorAtIndex4"
    },
    {
        "key": "ctrl+5",
        "command": "workbench.action.openEditorAtIndex5"
    },
    {
        "key": "ctrl+6",
        "command": "workbench.action.openEditorAtIndex6"
    },
    {
        "key": "ctrl+7",
        "command": "workbench.action.openEditorAtIndex7"
    },
    {
        "key": "ctrl+8",
        "command": "workbench.action.openEditorAtIndex8"
    },
    {
        "key": "ctrl+9",
        "command": "workbench.action.openEditorAtIndex9"
    },
    {
        "key": "alt+1",
        "command": "workbench.action.focusFirstEditorGroup"
    },
    {
        "key": "alt+2",
        "command": "workbench.action.focusSecondEditorGroup"
    },
    {
        "key": "alt+3",
        "command": "workbench.action.focusThirdEditorGroup"
    }
]

@Combii我找到了交换的方法

CMD+1、CMD+2、CMD+3、CTRL+1、CTRL+2、CTRL+3、

在macOS系统下，转到:

代码>首选项>键盘快捷键

在那个页面上，点击页面右上方的按钮…

并添加下面的配置，然后保存。

[
    {
        "key": "cmd+0",
        "command": "workbench.action.openLastEditorInGroup"
    },
    {
        "key": "cmd+1",
        "command": "workbench.action.openEditorAtIndex1"
    },
    {
        "key": "cmd+2",
        "command": "workbench.action.openEditorAtIndex2"
    },
    {
        "key": "cmd+3",
        "command": "workbench.action.openEditorAtIndex3"
    },
    {
        "key": "cmd+4",
        "command": "workbench.action.openEditorAtIndex4"
    },
    {
        "key": "cmd+5",
        "command": "workbench.action.openEditorAtIndex5"
    },
    {
        "key": "cmd+6",
        "command": "workbench.action.openEditorAtIndex6"
    },
    {
        "key": "cmd+7",
        "command": "workbench.action.openEditorAtIndex7"
    },
    {
        "key": "cmd+8",
        "command": "workbench.action.openEditorAtIndex8"
    },
    {
        "key": "cmd+9",
        "command": "workbench.action.openEditorAtIndex9"
    },
    {
        "key": "ctrl+1",
        "command": "workbench.action.focusFirstEditorGroup"
    },
    {
        "key": "ctrl+2",
        "command": "workbench.action.focusSecondEditorGroup"
    },
    {
        "key": "ctrl+3",
        "command": "workbench.action.focusThirdEditorGroup"
    }
]

您现在可以使用CMD+[1-9]切换选项卡和CTRL+[1-3]聚焦编辑器组!希望这个答案对你有帮助。

卓帕卡布拉有修正行为的正确答案。

我通常更喜欢使用CTRL + PAGE UP / DOWN来导航，而不是使用TAB键。

    {
        "key": "ctrl+pageUp",
        "command": "workbench.action.nextEditor"
    },
    {
        "key": "ctrl+pageDown",
        "command": "workbench.action.previousEditor"
    }

窗户

在Windows上使用Visual Studio Code时，可以使用CTRL + PAGE_UP切换到上一个选项卡，CTRL + PAGE_DN切换到下一个选项卡。

您还可以根据选项卡的(非零相对)索引切换到选项卡。你可以按住ALT键，再加一个数字(1到9)。

操作系统

要在选项卡之间快速导航，请按住CMD键，然后按下要切换到的选项卡的数字(1到9)。

您还可以通过CMD + ALT +左/右键盘快捷键在上一个/下一个选项卡之间切换。

请注意，要切换到不同编辑器组中的选项卡，必须首先切换到所需的编辑器组。

专业提示:如果您不喜欢任何一个键绑定，您可以将它们更改为您觉得更舒服的任何键绑定!

当我把窗口分成多个面板时，我发现CTRL+TAB和CTRL+SHIFT+TAB只在一个面板中循环打开文件(而不是所有面板)，这真的很烦人。要更改行为，使其在快速打开对话框中循环所有面板，同时保留行为，请将这些添加到您的键绑定:

  {
    "key": "ctrl+tab",
    "command": "workbench.action.quickOpenPreviousRecentlyUsedEditor"
  },
  {
    "key": "ctrl+shift+tab",
    "command": "workbench.action.quickOpenLeastRecentlyUsedEditor"
  },
  {
    "key": "ctrl+tab",
    "command": "workbench.action.quickOpenNavigateNextInEditorPicker",
    "when": "inEditorsPicker && inQuickOpen"
  },
  {
    "key": "ctrl+shift+tab",
    "command": "workbench.action.quickOpenNavigatePreviousInEditorPicker",
    "when": "inEditorsPicker && inQuickOpen"
  }

另一种快速更改标签的方法是VSCode 1.45(2020年4月)

使用鼠标滚轮切换标签 当您使用鼠标滚轮滚动编辑器选项卡时，您目前不能切换到选项卡，只能显示在视图之外的选项卡。 现在有了一个新的设置workbench.editor.scrollToSwitchTabs，如果你把它改成true，这个行为就可以改变。 注意:你也可以在滚动时按住Shift键来获得相反的行为(即你可以切换到标签，即使这个设置被关闭)。