是的，您需要打开对端口的访问。查看Security Groups http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html

您的EC2实例需要附加到一个允许您所需访问的安全组。

检查你的安全组

2-check Internet网关

3-检查路由表

安全组中的自定义ICMP规则不是它所需要的，至少对我来说是这样。 但下面的规则是可行的:

Type: All ICMP 
Protocol: TCP
Port range: 0 - 65535
Source: Anywhere - 0.0.0.0/0

完成此操作后，您将能够ping其他实例。你会看到如下内容:

PING 10.0.0.15 (10.0.0.15): 56 data bytes
64 bytes from 10.0.0.14: icmp_seq=1 ttl=64 time=3.9 ms
64 bytes from 10.0.0.14: icmp_seq=2 ttl=64 time=3.9 ms
64 bytes from 10.0.0.14: icmp_seq=3 ttl=64 time=10.6 ms
64 bytes from 10.0.0.14: icmp_seq=4 ttl=64 time=40.6 ms
64 bytes from 10.0.0.14: icmp_seq=5 ttl=64 time=3.8 ms
64 bytes from 10.0.0.14: icmp_seq=6 ttl=64 time=5.3 ms
64 bytes from 10.0.0.14: icmp_seq=7 ttl=64 time=6.5 ms
64 bytes from 10.0.0.14: icmp_seq=8 ttl=64 time=3.5 ms
64 bytes from 10.0.0.14: icmp_seq=9 ttl=64 time=21.0 ms
64 bytes from 10.0.0.14: icmp_seq=10 ttl=64 time=3.5 ms
64 bytes from 10.0.0.14: icmp_seq=11 ttl=64 time=3.5 ms
64 bytes from 10.0.0.14: icmp_seq=12 ttl=64 time=59.7 ms
64 bytes from 10.0.0.14: icmp_seq=13 ttl=64 time=3.5 ms
64 bytes from 10.0.0.14: icmp_seq=14 ttl=64 time=3.5 ms
64 bytes from 10.0.0.14: icmp_seq=15 ttl=64 time=4.8 ms
64 bytes from 10.0.0.14: icmp_seq=16 ttl=64 time=3.1 ms
64 bytes from 10.0.0.14: icmp_seq=17 ttl=64 time=3.1 ms
64 bytes from 10.0.0.14: icmp_seq=18 ttl=64 time=3.0 ms
64 bytes from 10.0.0.14: icmp_seq=19 ttl=64 time=3.1 ms

--- 10.0.0.14 ping statistics ---
20 packets transmitted, 19 packets received, 5% packet loss
round-trip min/avg/max = 3.0/9.9/59.7 ms

´s。

有两件事需要考虑。

检查安全组规则。 包括如下所示的入站规则。

类型:自定义ICMPV4， 协议:ICMP， Portrange: Echo Request， 来源:0.0.0.0/0

检查EC2实例的防火墙状态。 在/etc/ufw/before.rules中追加如下内容 -p icmp——icmp-type echo-request -j ACCEPT

我尝试了以上步骤中的多种解决方案，但对我有效的是

更改互联网连接到我的移动热点

再试一次。我家的网络设置不允许我连接到RDP。我在哪里可以SSH到linux服务器

1.Go to EC2 Dashboard and click "Running Instances" on "Security Groups"
2.select the group of your instance which you need to add security.  
3.click on the "Inbound" tab
4.Click "Edit" Button (It will open an popup window)
5.click "Add Rule"
6.Select the "Custom ICMP rule - IPv4" as Type
7.Enter the "0.0.0.0/0" as Source or your public IP

7.点击“保存”