我已经安装了HAXM，但它是一个较旧的版本。然后我从SDK管理器更新，然后模拟器工作!

Right click on your my computer icon and the CPU will be listed on the properties page. Or open device manager and look at the CPU. It must be an Intel processor that supports VT and NX bit (XD) - you can check your CPU # at http://ark.intel.com Also make sure hyperV off bcdedit /set hypervisorlaunchtype off XD bit is on bcdedit /set nx AlwaysOn Use the installer from https://software.intel.com/en-us/android/articles/intel-hardware-accelerated-execution-manager If you're using Avast, disable "Enable hardware-assisted virtualization" under: Settings > Troubleshooting. Restart the PC and try to run the HAXM installation again

给我这样的傻瓜一个更详细的答案:

Open the SDK manager Select the SDK Tools tab. Download – Make sure that intel x86 Emulator Accelerator (HAXM) is downloaded. Install – Now that HAXM is downloaded, make sure it is installed. In the SDK window it will show you where the SDK is located on your computer: Click/tap 3 times quickly to highlight this text and copy the folder location. Open the file explorer and paste in the file location. From here you can search “hax” to find the folder location for HAXM stuff. Once a file comes up in the search results, right click and select “open file location”. For me the location was C:\Users\Datu1\AppData\Local\Android\Sdk\extras\intel\Hardware_Accelerated_Execution_Manager . Find the file intelhaxm-android.exe and open/run it. Follow the instructions when it runs. You may wish to run haxm_check as an administrator (it’s in this same folder), but it may or may not work for you. The surefire way to tell if you can run hardware acceleration and if it’s enabled is to go to your computer’s bios settings from the startup menu. BIOS settings – Make sure hardware acceleration is enabled in your BIOS settings. The way to do this may vary a bit from system to system. You may need to press f10 or esc on startup. But with most (updated) Windows 10 computers you can access the BIOS settings by doing the following: type “advanced startup” in the Windows search bar; click on “change advanced startup uptions:” when it comes up. Click “Restart now”. After your computer restarts click on Troubleshoot. Click advanced options >firmware settings, then restart to change EUFI firmware settings. Wait for the restart then select the menu option for bios settings. With Intel processors the steps will be as follows or similar: Press the right arrow to go to the Configuration tab. Arrow down to Intel Virtual/Virtualizaion Technology and turn it on (should say Enabled). Exit and save changes. If Virtual Technology was previously disabled in your bios settings You will need to run the intelhaxm-android.exe file now to install haxm. Try restarting Android Studio and running your emulator again. If it’s still not working, restart your computer and try again, it should work.

注意:如果你打开了Windows Hyper-V，这将导致你不能运行haxm。如果你有hyper - v的问题，确保它在你的设置中被关闭:在Windows栏中搜索“hyper”;搜索结果会显示“打开或关闭Windows功能”。然后确保所有的Hyper-V盒子都是未勾选的。

对于那些仍然有问题的人，你可以尝试使用另一个Android模拟器，如Genymotion。

我正在使用Ryzen 5处理器，安装了最新的Windows 10更新(1809)，但仍然无法安装HAXM。所以，我解决这个问题的方法是:

在BIOS设置中启用“硬件虚拟化” 在Windows特性中启用Hypervisor平台 安装Genymotion与虚拟盒子-选择个人使用 安装Genymotion Android Studio插件——在Android Studio插件设置中找到

你可以从这里出发了。

启用虚拟化技术

这在我的案例中是有效的

重新启动计算机 连续按“Esc”键，然后按“F10”进入BIOS设置界面 配置 检查虚拟化技术

我的电脑是惠普Zbook 1. 引导设备进入BIOS(重新启动设备并继续按F10)。

导航到高级>设备或系统配置>选中“虚拟化技术(VTx)”和“虚拟化技术for Directed I/O (VTd)”前的复选框 保存更改并退出。

如果您使用的是AMD CPU，现在正式支持AMD虚拟化(如Ryzen CPU)。确保在BIOS中开启了虚拟化。

在“打开或关闭Windows功能”(你可以通过Windows搜索找到它)中，你需要启用它

Windows 10上的Windows Hypervisor平台17134.1(1803)2018年4月更新或更新(通常在文章中没有提到) hyper - v

重启并启动模拟器(x86版本)后，它应该开始启动，不会出现上述错误。