我的开发环境是

Xcode 7.0 7A220 Swift 2.0 iOS 9.0

以上答案并不完全适用于我

经过尝试，我最终的工作解决方案是:

let indent_large_enought_to_hidden:CGFloat = 10000
cell.separatorInset = UIEdgeInsetsMake(0, indent_large_enought_to_hidden, 0, 0) // indent large engough for separator(including cell' content) to hidden separator
cell.indentationWidth = indent_large_enought_to_hidden * -1 // adjust the cell's content to show normally
cell.indentationLevel = 1 // must add this, otherwise default is 0, now actual indentation = indentationWidth * indentationLevel = 10000 * 1 = -10000

结果是:

在使用iOS 8.4的Swift中:

/*
    Tells the delegate that the table view is about to draw a cell for a particular row. (optional)
*/
override func tableView(tableView: UITableView,
                        willDisplayCell cell: UITableViewCell,
                        forRowAtIndexPath indexPath: NSIndexPath)
{
    if indexPath.row == 3 {
        // Hiding separator line for only one specific UITableViewCell
        cell.separatorInset = UIEdgeInsetsMake(0, cell.bounds.size.width, 0, 0)
    }
}

Note: this snippet above will work on UITableView using dynamic cells. The only problem that you can encounter is when you use static cells with categories, a separator type different than none and a grouped style for the table view. In fact, in this particular case it will not hide the last cell of each category. For overcoming that, the solution that I found was to set the cell separator (through IB) to none and then creating and adding manually (through code) your line view to each cell. For an example, please check the snippet below:

/*
Tells the delegate that the table view is about to draw a cell for a particular row. (optional)
*/
override func tableView(tableView: UITableView,
    willDisplayCell cell: UITableViewCell,
    forRowAtIndexPath indexPath: NSIndexPath)
{
    // Row 2 at Section 2
    if indexPath.row == 1 && indexPath.section == 1 {
        // Hiding separator line for one specific UITableViewCell
        cell.separatorInset = UIEdgeInsetsMake(0, cell.bounds.size.width, 0, 0)

        // Here we add a line at the bottom of the cell (e.g. here at the second row of the second section).
        let additionalSeparatorThickness = CGFloat(1)
        let additionalSeparator = UIView(frame: CGRectMake(0,
            cell.frame.size.height - additionalSeparatorThickness,
            cell.frame.size.width,
            additionalSeparatorThickness))
        additionalSeparator.backgroundColor = UIColor.redColor()
        cell.addSubview(additionalSeparator)
    }
}

除非使用以下解决方法，否则无法在特定单元格上隐藏分隔符

- (void)layoutSubviews {
    [super layoutSubviews];
    [self hideCellSeparator];
}
// workaround
- (void)hideCellSeparator {
    for (UIView *view in  self.subviews) {
        if (![view isKindOfClass:[UIControl class]]) {
            [view removeFromSuperview];
        }
    }
}

对于Swift 2:

将以下行添加到viewDidLoad():

tableView.separatorColor = UIColor.clearColor()

在willdisplaycell:

cell.separatorInset = UIEdgeInsetsMake(0, cell.bounds.size.width, 0, 0)

在viewDidLoad中添加这一行:

self.tableView.separatorColor = [UIColor clearColor];

在cellForRowAtIndexPath中:

适用于iOS低版本

if(indexPath.row != self.newCarArray.count-1){
    UIImageView *line = [[UIImageView alloc] initWithFrame:CGRectMake(0, 44, 320, 2)];
    line.backgroundColor = [UIColor redColor];
    [cell addSubview:line];
}

适用于iOS 7以上版本(包括iOS 8)

if (indexPath.row == self.newCarArray.count-1) {
    cell.separatorInset = UIEdgeInsetsMake(0.f, cell.bounds.size.width, 0.f, 0.f);
}