在部署安装包之前，我总是控制它的内容。

这只是一个简单的命令行调用(根据terrence的帖子)，打开命令行并进入

msiexec /a Package.msi /qb TARGETDIR="%CD%\Extract" /l*vx "%CD\install.log%"

这将把包内容提取到带有当前路径的子目录“extract”中。

创建现场、测试、培训……使用相同源文件的版本。

简而言之:为每个安装程序创建唯一的UpgradeCode，并自动为每个安装程序定义每个Guid的第一个字符，其余31个字符是唯一的。

先决条件

MSBuild社区任务

假设

WiX变量用于定义UpgradeCode、ProductName、InstallName。 您已经有了一个工作的安装程序。你不动手我是不会动手的。 所有组件都保存在一个文件(Components.wxs)中。如果你有多个文件，这个过程是有效的，只是有更多的工作要做。

目录结构

设置。图书馆 所有wxs文件(组件，功能，UI对话框，…) Common.Config.wxi (ProductCode="*"， ProductVersion, PlatformProgramFilesFolder，…) 设置。生活(wixproj) 链接所有安装程序。“添加为链接”(Visual Studio中“添加”按钮旁边的向下箭头按钮) 配置。wxi(有唯一的UpgradeCode, ProductName, InstallName，…) 设置。测试,… 按live但配置。wxi为测试环境配置。

过程

Create Setup.Library directory and move all your wxs and wxi files (except Config.wxi) from existing project. Create Setup.Live, Setup.Test, etc as per normal wixproj. Add BeforeBuild target in wixproj in Setup.Live, etc to perform MSBuild Community Task FileUpdate to modify Guids (I used A for Live, B for Test and C for training) Add AfterBuild target to revert Components.wxs Guids back to 0. Verify with Orca that each component in each MSI has the modified guid. Verify that original guids are restored. Verify that each MSI is installing (and upgrading) correct product and location.

例子Config.wxi

<?xml version="1.0" encoding="utf-8"?>
<Include>
<!-- Upgrade code should not change unless you want to install 
     a new product and have the old product remain installed, 
     that is, both products existing as separate instances. -->
<?define UpgradeCode = "YOUR-GUID-HERE" ?>

<!-- Platform specific variables -->
<?if $(var.Platform) = x64 ?>
  <!-- Product name as you want it to appear in Add/Remove Programs-->
  <?define ProductName = "Foo 64 Bit [Live]" ?>
<?else ?>
  <?define ProductName =  "Foo [Live]" ?>
<?endif ?>

<!-- Directory name used as default installation location -->
<?define InstallName = "Foo [Live]" ?>

<!-- Registry key name used to store installation location -->
<?define InstallNameKey = "FooLive" ?>

<?define VDirName = "FooLive" ?>
<?define AppPoolName = "FooLiveAppPool" ?>
<?define DbName = "BlahBlahLive" ?>
</Include>

例子Config.Common.wxi

<?xml version="1.0" encoding="utf-8"?>
<Include>
<!-- Auto-generate ProductCode for each build, release and upgrade -->
<?define ProductCode = "*" ?>

<!-- Note that 4th version (Revision) is ignored by Windows Installer -->
<?define ProductVersion = "1.0.0.0" ?>

<!-- Minimum version supported if product already installed and this is an upgrade -->
<!-- Note that 4th version (Revision) is ignored by Windows Installer -->
<?define MinimumUpgradeVersion = "0.0.0.0" ?>

<!-- Platform specific variables -->
<?if $(var.Platform) = x64 ?>
   <?define Win64 = "yes" ?>
   <?define PlatformProgramFilesFolder = "ProgramFiles64Folder" ?>
<?else ?>
   <?define Win64 = "no" ?>
   <?define PlatformProgramFilesFolder = "ProgramFilesFolder" ?>
<?endif ?>

<?define ProductManufacturer = "Foo Technologies"?>

<!-- Decimal Language ID (LCID) for the Product. Used for localization. -->
<?define ProductLanguage = "1033" ?>

<?define WebSiteName = "DefaultWebSite" ?>
<?define WebSitePort = "80" ?>

<?define DbServer = "(local)" ?>
</Include>

例子Components.wxs

<?xml version="1.0" encoding="utf-8"?>
<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
  <!-- The pre-processor variable which allows the magic to happen :) -->
  <?include $(sys.CURRENTDIR)\Config.wxi?>
  <?include ..\Setup.Library\Config.Common.wxi?>
  <Fragment Id="ComponentsFragment">
    <Directory Id="TARGETDIR" Name="SourceDir">
      <Directory Id="$(var.PlatformProgramFilesFolder)">
        <Directory Id="INSTALLLOCATION" Name="$(var.InstallName)">
          <Component Id="ProductComponent" Guid="0XXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX" KeyPath="yes">
          ...

注意:我现在建议将Guid属性从Component中去掉(相当于*)，每个组件使用一个文件，并将文件设置为小键盘。这样就不需要调用如下所示的ModifyComponentsGuids和RevertComponentsGuids目标。不过，这可能不适用于您的所有组件。

例子Setup.Live.wixproj

<Import Project="$(MSBuildExtensionsPath)\MSBuildCommunityTasks\MSBuild.Community.Tasks.Targets" />
<Target Name="BeforeBuild">
  <CallTarget Targets="ModifyComponentsGuids" />
</Target>
<Target Name="AfterBuild">
  <CallTarget Targets="RevertComponentsGuids" />
</Target>
<!-- Modify the first character of every Guid to create unique value for Live, Test and Training builds -->
<Target Name="ModifyComponentsGuids">
  <FileUpdate Files="..\Setup.Library\Components.wxs" Regex="Guid=&quot;([a-f]|[A-F]|\d)" ReplacementText="Guid=&quot;A" />
</Target>
<!-- Revert the first character of every Guid back to initial value -->
<Target Name="RevertComponentsGuids">
  <FileUpdate Files="..\Setup.Library\Components.wxs" Regex="Guid=&quot;([a-f]|[A-F]|\d)" ReplacementText="Guid=&quot;0" />
</Target>

最终的想法

This process should also work for creating different installers for different merge modules (Live, Test, ... as features) for the same installer. I went with different installers as it seemed a safer option, there is more risk that someone might upgrade Live instead of Training if they're on the same box and you just use features for the different merge modules. If you use your MSI to perform upgrades as well as new installs i.e. the major upgrade only approach, and you save your installation location in the registry, remember to create a variable for the key name for each install. We also create variables in each Config.wxi to enable unique virtual directory names, application pools, database names, et cetera for each installer.

更新1:如果您为每个文件创建带有Guid="*"的组件，并将文件设置为小键盘，则自动生成组件Guid将不需要调用FileUpdate任务。

更新2:我们遇到的一个问题是，如果您没有自动生成组件Guid，并且构建失败，那么临时文件需要手动删除。

更新3:找到了一种方法来消除对svn的依赖:externals和临时文件创建。这使得构建过程更具弹性(如果您不能通配符您的guid，这是最好的选择)，并且在灯光或蜡烛中构建失败时不那么脆弱。

更新4:WiX 3.0+支持使用实例转换的多实例，当然也值得一看。

使用Heat.exe砸碎脸和造成“史诗Pwnage”痛苦的大安装

扩展Si的和 Robert-P关于热的回答。 翻译: (使用heat可以避免手动将单个文件输入到项目中，并且可以自动化构建，从而使整个过程更容易。) 详细介绍WiX 2.0热语法

For newer versions (not all that different from older versions but there are potentially annoying syntax changes....) go to the directory Heat is in from the cmd.exe and just type in heat but I have a example one right here for help with newer versions if needed. Adding the following to your Build Event in visual studio 2010. (Right Click Project->Properties ->Build Events-> Pre-Build Events) $(WIX)bin\heat.exe" dir "$(EnviromentVariable)" -cg GroupVariable -gg -scom -sreg -sfrag - srd -dr INSTALLLOCATION -var env.LogicPath -out "$(FragmentDir)\FileName.wxs -gg Generates Guids when heat is run(as in when you execute the command above) -scom Dont grab "COM files" -sreg Dont grab "Registry Files" -sfrag Dont grab "Fragments" -srd Dont grab the "root Dir" dir dir indicates you want Heat to look in a folder "$(EnviromentVariable)" The name of the variable you would add to the Preprocessor variables in the (Right click project, Go to properties) project properties->Build section where it says Define preprocessor variables (assumes visual studio 2010) Example: EnviromentVariable=C:\Project\bin\Debug;No double quotes but end with a semicolon -cg GroupVariable The ComponentGroup that will be referenced from the fragment created to the main wxs file FragmentDir The fragment directory where the output wxs fragment will be stored FileName.wxs The the name of the file Full tutorial here, So freakin helpful Part 1 Part 2

使用RobM特殊的“记住属性”模式

http://robmensching.com/blog/posts/2010/5/2/The-WiX-toolsets-Remember-Property-pattern

我很惊讶没有人提到在构建期间使用T4生成WXS文件。我是通过Henry Lee @ New Age Solutions了解到这一点的。

实际上，您创建了一个自定义MSBuild任务来执行T4模板，该模板在编译Wix项目之前输出WXS。这允许您(取决于您如何实现它)自动包含来自编译另一个解决方案的所有程序集输出(这意味着您不再需要在添加新程序集时编辑wxs)。

为COM互操作注册。net程序集，兼容x86/x64

注意:这个片段本质上与REGASM Assembly.dll /codebase相同

在这个示例中发生了一些事情，所以这里是代码，我将在后面解释它……

  <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
  <?include $(sys.CURRENTDIR)\Config.wxi?>
  <?if $(var.Win64) ?>
  <?define CLSIDRoots = "CLSID;Wow6432Node\CLSID"?>
  <?else ?>
  <?define CLSIDRoots = "CLSID"?>
  <?endif?>
  <!-- ASCOM Driver Assembly with related COM registrations -->
  <Fragment>
    <DirectoryRef Id="INSTALLLOCATION" />
  </Fragment>
  <Fragment>
    <ComponentGroup Id="cgAscomDriver">
      <Component Id="cmpAscomDriver" Directory="INSTALLLOCATION" Guid="{0267031F-991D-4D88-A748-00EC6604171E}">
        <File Id="filDriverAssembly" Source="$(var.TiGra.Astronomy.AWRDriveSystem.TargetPath)" KeyPath="yes" Vital="yes" Assembly=".net" AssemblyApplication="filDriverAssembly"  />
        <RegistryKey Root="HKCR" Key="$(var.DriverId)"  Action="createAndRemoveOnUninstall">
          <RegistryValue Type="string" Value="$(var.DriverTypeName)"/>
          <RegistryKey Key="CLSID">
            <RegistryValue Type="string" Value="$(var.DriverGuid)" />
          </RegistryKey>
        </RegistryKey>
        <?foreach CLSID in $(var.CLSIDRoots) ?>
        <RegistryKey Root="HKCR" Key="$(var.CLSID)" Action="none">
          <RegistryKey Key="$(var.DriverGuid)" Action="createAndRemoveOnUninstall">
            <RegistryValue Type="string" Value="$(var.DriverTypeName)"/>
            <RegistryKey Key="InprocServer32">
              <RegistryValue Type="string" Value="mscoree.dll" />
              <RegistryValue Type="string" Name="ThreadingModel" Value="Both"/>
              <RegistryValue Type="string" Name="Class" Value="$(var.DriverTypeName)"/>
              <RegistryValue Type="string" Name="Assembly" Value="!(bind.assemblyFullname.filDriverAssembly)" />
              <RegistryValue Type="string" Name="RuntimeVersion" Value="v2.0.50727"/>
              <RegistryValue Type="string" Name="CodeBase" Value="file:///[#filDriverAssembly]" />
              <RegistryKey Key="!(bind.fileVersion.filDriverAssembly)" >
                <RegistryValue Type="string" Name="Class" Value="$(var.DriverTypeName)"/>
                <RegistryValue Type="string" Name="Assembly" Value="!(bind.assemblyFullname.filDriverAssembly)" />
                <RegistryValue Type="string" Name="RuntimeVersion" Value="v2.0.50727"/>
                <RegistryValue Type="string" Name="CodeBase" Value="file:///[#filDriverAssembly]" />
              </RegistryKey>
            </RegistryKey>
            <RegistryKey Key="ProgId" Action="createAndRemoveOnUninstall">
              <RegistryValue Type="string" Value="$(var.DriverId)" />
            </RegistryKey>
            <RegistryKey Key="Implemented Categories" Action="createAndRemoveOnUninstall" >
              <RegistryKey Key="{62C8FE65-4EBB-45e7-B440-6E39B2CDBF29}" Action="createAndRemoveOnUninstall" />
            </RegistryKey>
          </RegistryKey>
        </RegistryKey>
        <?endforeach?>
      </Component>
    </ComponentGroup>
  </Fragment>
</Wix>

如果你想知道，这实际上是一个ASCOM望远镜驱动程序。

首先，我采纳了上面的建议，在一个单独的文件中创建了一些平台变量，你可以在XML中看到这些变量。

接近顶部的if-then-else部分处理x86 vs x64兼容性。我的程序集目标是“任何CPU”，所以在x64系统上，我需要注册它两次，一次在64位注册表中，一次在32位Wow6432Node区域中。if-then-else为我设置了这个，这些值稍后在foreach循环中使用。这样，我只需要编写一次注册表项(DRY原则)。

file元素指定实际安装和注册的程序集dll:

<File Id="filDriverAssembly" Source="$(var.TiGra.Astronomy.AWRDriveSystem.TargetPath)" KeyPath="yes" Vital="yes" Assembly=".net" AssemblyApplication="filDriverAssembly"  />

没有什么革命性的东西，但是请注意Assembly=".net" -这个属性本身就会导致程序集被放入GAC，这不是我想要的。使用AssemblyApplication属性指向它本身只是阻止Wix将文件放入GAC的一种方法。现在Wix知道它是一个。net程序集，但是，它允许我在XML中使用某些绑定器变量，例如!(bind.assemblyFullname.filDriverAssembly)来获取程序集的全名。