流浪错误:在Linux客户端挂载文件夹失败

我有一些问题与Vagrant共享文件夹，我的基本系统是Ubuntu 13.10桌面。

我不明白为什么我有这个错误是配置不正确的东西?是NFS问题还是Virtualbox客户附加功能?我尝试了不同的盒子，但同样的问题。

Failed to mount folders in Linux guest. This is usually because
    the "vboxsf" file system is not available. Please verify that
    the guest additions are properly installed in the guest and
    can work properly. The command attempted was:

    mount -t vboxsf -o uid=`id -u vagrant`,gid=`getent group vagrant | cut -d: -f3` /vagrant /vagrant
    mount -t vboxsf -o uid=`id -u vagrant`,gid=`id -g vagrant` /vagrant /vagrant

以下是流浪起来后的完整流程:

$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'u131032'...
==> default: Matching MAC address for NAT networking...
==> default: Setting the name of the VM: vagrant_default_1396020504136_46442
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: hostonly
==> default: Forwarding ports...
    default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Error: Connection timeout. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
    default: Error: Remote connection disconnect. Retrying...
==> default: Machine booted and ready!
GuestAdditions versions on your host (4.3.10) and guest (4.2.16) do not match.
 * Stopping VirtualBox Additions
   ...done.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  dkms libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libfontenc1
  libgl1-mesa-dri libglapi-mesa libice6 libllvm3.3 libpciaccess0 libpixman-1-0
  libsm6 libtxc-dxtn-s2tc0 libxaw7 libxcomposite1 libxdamage1 libxfixes3
  libxfont1 libxkbfile1 libxmu6 libxpm4 libxrandr2 libxrender1 libxt6
  x11-common x11-xkb-utils xfonts-base xfonts-encodings xfonts-utils
  xserver-common xserver-xorg-core
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  virtualbox-guest-dkms* virtualbox-guest-utils* virtualbox-guest-x11*
0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
After this operation, 11.1 MB disk space will be freed.
(Reading database ... 65615 files and directories currently installed.)
Removing virtualbox-guest-dkms ...

-------- Uninstall Beginning --------
Module:  virtualbox-guest
Version: 4.2.16
Kernel:  3.11.0-18-generic (i686)
-------------------------------------

Status: Before uninstall, this module version was ACTIVE on this kernel.

vboxguest.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.11.0-18-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.


vboxsf.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.11.0-18-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.


vboxvideo.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.11.0-18-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

depmod....

DKMS: uninstall completed.

------------------------------
Deleting module version: 4.2.16
completely from the DKMS tree.
------------------------------
Done.
Removing virtualbox-guest-x11 ...
Purging configuration files for virtualbox-guest-x11 ...
Removing virtualbox-guest-utils ...
Purging configuration files for virtualbox-guest-utils ...
Processing triggers for ureadahead ...
Processing triggers for man-db ...
Reading package lists...
Building dependency tree...
Reading state information...
dkms is already the newest version.
dkms set to manually installed.
linux-headers-3.11.0-18-generic is already the newest version.
linux-headers-3.11.0-18-generic set to manually installed.
The following packages were automatically installed and are no longer required:
  libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libfontenc1 libgl1-mesa-dri
  libglapi-mesa libice6 libllvm3.3 libpciaccess0 libpixman-1-0 libsm6
  libtxc-dxtn-s2tc0 libxaw7 libxcomposite1 libxdamage1 libxfixes3 libxfont1
  libxkbfile1 libxmu6 libxpm4 libxrandr2 libxrender1 libxt6 x11-common
  x11-xkb-utils xfonts-base xfonts-encodings xfonts-utils xserver-common
  xserver-xorg-core
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Copy iso file /usr/share/virtualbox/VBoxGuestAdditions.iso into the box /tmp/VBoxGuestAdditions.iso
mount: block device /tmp/VBoxGuestAdditions.iso is write-protected, mounting read-only
Installing Virtualbox Guest Additions 4.3.10 - guest version is 4.2.16
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.3.10 Guest Additions for Linux............
VirtualBox Guest Additions installer
Copying additional installer modules ...
Installing additional modules ...
Removing existing VirtualBox DKMS kernel modules ...done.
Removing existing VirtualBox non-DKMS kernel modules ...done.
Building the VirtualBox Guest Additions kernel modules ...done.
Doing non-kernel setup of the Guest Additions ...done.
Starting the VirtualBox Guest Additions ...done.
Installing the Window System drivers
Could not find the X.Org or XFree86 Window System, skipping.
An error occurred during installation of VirtualBox Guest Additions 4.3.10. Some functionality may not work as intended.
In most cases it is OK that the "Window System drivers" installation failed.
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Exporting NFS shared folders...
==> default: Preparing to edit /etc/exports. Administrator privileges will be required...
nfsd running
sudo: /usr/bin/exportfs: command not found
==> default: Mounting NFS shared folders...
==> default: Mounting shared folders...
    default: /vagrant => /home/me/Documents/Work/project/vagrant
Failed to mount folders in Linux guest. This is usually because
the "vboxsf" file system is not available. Please verify that
the guest additions are properly installed in the guest and
can work properly. The command attempted was:

mount -t vboxsf -o uid=`id -u vagrant`,gid=`getent group vagrant | cut -d: -f3` /vagrant /vagrant
mount -t vboxsf -o uid=`id -u vagrant`,gid=`id -g vagrant` /vagrant /vagrant

我的Vagrantfile配置是:

# -*- mode: ruby -*-
# vi: set ft=ruby :

# Vagrantfile API/syntax version. Don't touch unless you know what you're doing!
VAGRANTFILE_API_VERSION = "2"

personalization = File.expand_path("../Personalization", __FILE__)
load personalization

Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|
  config.vm.box = $base_box
  config.vm.box_url = $base_box_url

  config.vm.hostname = $vhost + ".dev"

  config.hostsupdater.aliases = ["api." + $vhost + ".dev", "mysql." + $vhost + ".dev"]
  config.hostsupdater.remove_on_suspend = true

  # set auto_update to ture to check the correct 
  # additions version when booting the machine
  config.vbguest.auto_update = true
  config.vbguest.auto_reboot = true

  config.vm.network :private_network, ip: $ip

  config.vm.synced_folder "../", "/srv/www/vhosts/" + $vhost + ".dev", type: "nfs"

  config.vm.provider :virtualbox do |v|
    v.customize ["modifyvm", :id, "--memory", 2048]
    v.customize ["modifyvm", :id, "--cpus", "1"]
    v.customize ["modifyvm", :id, "--cpuexecutioncap", "100"]
    v.customize ["modifyvm", :id, "--ioapic", "off"]
    v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
  end

  config.vm.provision "shell" do |s|
    s.path = "vagrant-bootstrap.sh"
    s.args = $vhost + " " + $mysql_password + " " + $application_database
  end
end

Personalization文件是:

# Name of the vhost to create
$vhost = "project"

# Use the Ubunut 32bit or 64bit
$base_box_url = "http://cloud-images.ubuntu.com/vagrant/saucy/current/saucy-server-cloudimg-i386-vagrant-disk1.box"

# VM IP
$ip = "192.168.7.7"

# Base box name
$base_box = "u131032"

# MySQL
$mysql_password = "admin"
$application_database = "project"

在Vagrant中启用了以下插件:

$ vagrant plugin list
vagrant-hostsupdater (0.0.11)
vagrant-login (1.0.1, system)
vagrant-share (1.0.1, system)
vagrant-vbguest (0.10.0)

当前回答

现在是2017年。以防有人遇到同样的问题。

对于bento/centos-6.7，我得到了同样的错误。通过添加插件vagrant-vbguest(0.13.0)解决了这个问题。 C:> vagrant plugin install vagrant-vbguest

邮箱网址:http://opscode-vm-bento.s3.amazonaws.com/vagrant/virtualbox/opscode_centos-7.0_chef-provisionerless.box

这个centos-7版本也给出了同样的错误

错误:

==> build: Mounting shared folders...
    build: /vagrant => C:/projects/
Vagrant was unable to mount VirtualBox shared folders. This is usually
because the filesystem "vboxsf" is not available. This filesystem is
made available via the VirtualBox Guest Additions and kernel module.
Please verify that these guest additions are properly installed in the
guest. This is not a bug in Vagrant and is usually caused by a faulty
Vagrant box. For context, the command attempted was:

mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant

The error output from the command was:

/sbin/mount.vboxsf: mounting failed with the error: No such device

我的配置:

C:\projects>vagrant -v
Vagrant 1.9.1

C:\projects> vboxmanage -v
5.0.10r104061

C:\projects>vagrant plugin list
vagrant-cachier (1.2.1)
vagrant-hostmanager (1.8.5)
vagrant-hosts (2.8.0)
vagrant-omnibus (1.5.0)
vagrant-share (1.1.6, system)
vagrant-vbguest (0.13.0)
vagrant-vbox-snapshot (0.0.10)

因为我已经有流浪者-vbguest插件，它试图更新VBoxGuestAdditions在centos-7当它看到不同版本的VBGuestAdditions安装在主机5.0.10和客户4.3.20。

我甚至检查了符号链接存在。

[root@build VBoxGuestAdditions]# ls -lrt /usr/lib
lrwxrwxrwx.  1 root root   53 Jan 14 12:06 VBoxGuestAdditions -> /opt/VBoxGuestAdditions-5.0.10/lib/VBoxGuestAdditions
[root@build VBoxGuestAdditions]# mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant
/sbin/mount.vboxsf: mounting failed with the error: No such device

这没有按照user3006381的建议工作

vagrant ssh
sudo yum -y install kernel-devel
sudo yum -y update
exit
vagrant reload --provision

centos-7的解决方案:psychok7给出的有效

见鬼的自动更新。config.vbguest。Auto_update = false 然后流浪汉破坏——强迫和流浪汉起来

结果:

javareport: Guest Additions Version: 4.3.20
javareport: VirtualBox Version: 5.0
==> javareport: Setting hostname...
==> javareport: Configuring and enabling network interfaces...
==> javareport: Mounting shared folders...
javareport: /vagrant => C:/projects

C:\project>

2017-01-14 13:32:22

其他回答

在我之前使用的Ubuntu 16.04镜像中，错误是在为不同的vagrant镜像安装vagrant-vbguest后开始的，然后启动Ubuntu虚拟机。它升级了客户附加到5.1.20，从那时起，坐骑开始失败。更新框，apt更新+升级和相同，vbguest将安装更新的5.1.20版本。

通过手动运行来解决:

sudo apt-get update
sudo apt-get install virtualbox-guest-dkms

同时禁用:config.vbguest。Auto_update = false (可能不需要)。

2017-04-25 21:07:01

到目前为止，安装在一些机器(ubuntu)上可以工作，而一些机器则不能(centos 7) 但是安装插件可以解决这个问题

vagrant plugin install vagrant-vbguest

除此之外什么都不用做，只要

vagrant reload

2018-07-16 17:37:18

我在使用Centos 7时也遇到了同样的问题，我认为这是由于一个过时的内核加上更新版本的VirtualBox造成的。基于blizzard的更新，这对我来说是有效的(vagrant-vbguest插件已经安装):

vagrant ssh
sudo yum -y install kernel-devel
sudo yum -y update
exit
vagrant reload --provision

2016-03-02 02:57:15

这似乎是由于与vbguest vagrant插件和最新版本的vagrant不兼容。它试图更新客户添加，但未能完全/正确地做到这一点。

2014-04-10 20:46:09