我刚刚重新安装XAMPP,当我试图在XAMPP控制面板中启动我的Apache服务器时,我现在得到以下错误:

16:50:25  [Apache]     Status change detected: running
16:50:26  [Apache]     Status change detected: stopped
16:50:26  [Apache]     Error: Apache shutdown unexpectedly.
16:50:26  [Apache]     This may be due to a blocked port, missing dependencies,
16:50:26  [Apache]     improper privileges, a crash, or a shutdown by another method.
16:50:26  [Apache]     Press the Logs button to view error logs and check
16:50:26  [Apache]     the Windows Event Viewer for more clues
16:50:26  [Apache]     If you need more help, copy and post this
16:50:26  [Apache]     entire log window on the forums

我怎么解决这个问题?


当前回答

发生此错误是因为为Apache分配的端口被另一个程序使用。要检查使用端口的应用程序,我们为Apache分配的端口,可以通过单击,

Netstat按钮。

这是Netstat文件,

首先,我为Apache分配了8080端口,我最近安装的Oracle DB.TNSLSNR.exe现在已经使用了8080端口。

因此,通过查看这个文件,我们可以选择一个与其他应用程序不冲突的端口。在我的例子中,端口8060与任何应用程序都没有冲突。通过选择,我们可以改变httpd.conf文件(XAMPP控制面板->配置)如上所述。

其他回答

遵循以下步骤:

Open your XAMPP control panel then click its "Config" Choose the "Apache (httpd.conf)" and find this code below and change it into this one: #Change this to Listen on specific IP addresses as shown below #to prevent Apache from glomming onto all bound IP addresses. #Listen 0.0.0.0:80 #Listen [::]:80 Listen 80 # Dynamic Shared Object (DSO) Support Save it (Ctrl + S) After that, go back to the XAMPP control panel and click its config again. Choose "Apache (httpd-ssl.conf)", find this code below, and change it again: # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" # #Listen 0.0.0.0:443 #Listen [::]:443 Listen 443 Save it (Ctrl + S) Then, click the "config" (note: above the netstat) and click the "service and port settings". Change "Main Port" to 8080 and "SSL Port" to 4433, then save it. Finally, go to the "control panel" -> "Programs & Features" -> "Turn Windows On or Off". Uncheck your "Internet Information Services", and then click OK.

只需等待它,您的计算机/笔记本电脑将自动重新启动,并尝试再次打开XAMPP控制面板,然后启动Apache。

我试了所有的办法,但我的问题还是没有解决。事实证明,在安装Visual Studio 2019之后,我的c++可重分发文件发生了很多变化。

我实际上在跑步

test_php.bat

它告诉了我错误是什么

C:\Windows\SYSTEM32\VCRUNTIME140.dll' 14.0与此PHP构建不兼容,该PHP构建在未知的第0行中链接到14.28

因此,我开始了:

微软Visual Studio网站->其他工具,框架,和 > Microsoft Visual c++ Redistributable for Visual Studio 2019

和下载。安装文件并重新启动我的电脑后,问题就解决了。Apache现在可以正常运行了

首先确保你的\xampp文件夹在根目录下!这很重要,因为路径是相对的。 然后确保以管理员权限运行xampp_control.exe。 然后更改下面的文件,以避免阻塞端口80的问题。

在\xampp\xampp-control.ini中应该这样设置:

[ServicePorts]
Apache=8080
ApacheSSL=4433

找到\xampp\apache\conf\httpd.conf并设置:

Listen 8080

ServerName localhost:8080

找到\xampp\apache\conf\extra\httpd-ssl.conf并设置:

Listen 4433

<VirtualHost _default_:4433>

ServerName www.example.com:4433

然后结束所有服务,以admin权限重新启动xampp-control.exe。它应该运行!

我试图在cmd中执行httpd.exe,得到错误,在httpd-vhosts.conf中有语法错误。 我检查了文件,发现了什么问题,现在工作正常。

所以,如果你面临这个错误,那么它可能是因为httpd-vhosts或任何其他文件。

尝试通过cmd执行程序,您将得到错误细节和语法错误所在行。

祝你好运

如果上面所有的答案都不奏效,那么就这么做。注释掉php.ini文件中的所有扩展名。

In xampp control panel, click on Apache config. click on php.ini In php ctrl + F (extension) to find all extensions in your php.ini Comment out each and every active extension by adding a ; at the start of each extension line. example ;;;extension=bz2 i put 3 ;;; because i wanted to know ones i commented out so that when i come back to deburg which one had a problem, it was easy for me to see which ones i commented out. Make sure all extensions=whatever are commented out. Run your apache server. To pickup which extension was the problem, one by one un-comment your extensions while restarting your server until you catch the culprit.