In my case I edited the http.conf file for I wanted localhost to be accessible by other computers on the network and did not set a static IP on my network adapter. I also checked netstat and saw nobody was using port 80. So I opened cmd and typed ipconfig I also opened the http.conf and searched(CTRL + F) for "Listen 80". The line above it, if not commented, enables localhost to be accessible over the network. It should look something like this:Listen 192.168.93.3:80 Comparing the result from ipconfig command, I saw that my current ip address isn't the same as the one on the http.conf file. So I changed the ip address on the http.conf file with the one currently assigned to me and it worked.

In my case I edited the http.conf file for I wanted localhost to be accessible by other computers on the network and did not set a static IP on my network adapter. I also checked netstat and saw nobody was using port 80. So I opened cmd and typed ipconfig I also opened the http.conf and searched(CTRL + F) for "Listen 80". The line above it, if not commented, enables localhost to be accessible over the network. It should look something like this:Listen 192.168.93.3:80 Comparing the result from ipconfig command, I saw that my current ip address isn't the same as the one on the http.conf file. So I changed the ip address on the http.conf file with the one currently assigned to me and it worked.

首先确保你的\xampp文件夹在根目录下!这很重要，因为路径是相对的。 然后确保以管理员权限运行xampp_control.exe。 然后更改下面的文件，以避免阻塞端口80的问题。

在\xampp\xampp-control.ini中应该这样设置:

[ServicePorts]
Apache=8080
ApacheSSL=4433

找到\xampp\apache\conf\httpd.conf并设置:

Listen 8080

ServerName localhost:8080

找到\xampp\apache\conf\extra\httpd-ssl.conf并设置:

Listen 4433

<VirtualHost _default_:4433>

ServerName www.example.com:4433

然后结束所有服务，以admin权限重新启动xampp-control.exe。它应该运行!

首先，您应该验证httpd-vhosts文件中没有多余的虚拟主机。我的意思是遵循简单的规则:在配置文件中，1个项目= 1个虚拟主机。否则，即使您更改端口等，也会面临错误。

在XAMPP控制面板V3.2.1中，单击右上角的“NetStat”按钮。确保端口80没有被任何其他程序使用。然后点击它下面的“Shell”。在shell提示符中发出这个命令;

Apache_Start.bat

或者输入“ap”，然后按tab键两次，这将类似地生成上述命令。 您将看到Apache失败的确切错误。这很可能是虚拟主机配置问题或其他问题。它将显示发生错误的行号。只需要修复这个错误。注意，在RootDocument中，尾随的\也可能是错误的来源。删除任何拖尾""。

windows用户的最佳解决方案是:

打开netstat (from XAMPP CONTROL PANEL) 查找使用80端口的进程的PID。 用Administrative打开CMD。 执行taskkill /pid pid(用netstat中找到的pid代替pid) Heyy enjoy u Done.....