我正在尝试在我全新的Nexus 10上安装一个Android应用程序。我有一个。apk文件。我下载了Android SDK，安装了“Android SDK Tools”，“Android SDK Platform-tools”和谷歌USB Driver。我已经在我的Nexus 10上检查了“未知来源”的设置。
当我从命令终端运行“adb devices”时，它不会列出任何设备。我试图遵循这个建议，因为它与我之前在Stack Overflow上找到的建议完全相同。在执行这些步骤之后，“adb devices”仍然返回一个空列表，更糟糕的是，当我将Nexus 10连接到我的PC时，Windows不会显示设备内的任何文件夹。
我已经取消了该链接中的步骤，以及迄今为止我所做的所有其他操作，还从设备管理器中卸载了我的Nexus 10并重新安装了它，但我仍然没有在设备中看到任何文件夹。
为了让我的设备显示在ADB设备中，我是否遗漏了什么?
我怎么做才能让Windows看到设备内的文件夹?
当前回答
Windows 8无法识别我的Nexus 10设备。通过设备上的设置对话框设置传输模式为摄像机(PTP)修正。
>存储>菜单> USB计算机连接到“相机(PTP)”
其他回答
For the Blu Studio 5.5s ADB drivers, you have to go through this hoop. I am certain it is the same with all Blu phones or maybe for all non-Google mfg phones, I am not sure. First of all if you connect the Blu device with USB cable and USB Debuggin off, you will see that Windows 7 loads a generic driver for you to copy on/off files to the phone and SD storage. This will appear when the USB cable is first plugged in and appears as a device icon under Control Panel, Device Manager, Portable Devices, BLU STUDIO 5.5 S (or the device you are working with). Do not bother getting the hardware ID yet - just observe that this happens (which indicates you are good so far and don't have a bad cable or something).
Go to the phone and switch on USB Debugging in the Developer section of your phone. Notice that an additional item appears as an undefined device now in the device manager list, it will have the yellow exclamation mark and it may have the same name of the phone listed as you saw under Portable Devices. Ignore this item for the moment. Now, without doing anything to the phone (it should be already in USB debug mode) go back to the Portable Devices in Device Manager and right-click the BLU STUDIO 5.5 S or whatever phone you are working with that is listed there without the exclamation mark (listed under Portable Devices). Right click on the icon under Portable Devices, in this example the name that appears is BLU STUDIO 5.5 S. On that icon select Properties, Details, and under the pull down, select Hardware IDs and copy down what you see.
对于BLU STUDIO 5.5 S，我得到:
USB\VID_0BB4&PID_0C02&REV_0216&MI_00
USB\VID_0BB4&PID_0C02&MI_00
(注意，如果你不按顺序这样做，HW ID将与手机USB调试关闭时不同。你想复制的值，它改变时，USB调试是ON)
现在按照上面的说明进行操作，当然要定制添加INF文件的行，使用与您自己的手机相关的行，而不是与Nexus 10相关的行。下面是要定制的内容;当你下载SDK时，你应该有一个从ZIP扩展而来的文件结构，如下所示:
\adt-bundle-windows-x86_64-20140321\sdk\extras\google\usb_driver
找到名为android_winusb的文件。usb_driver文件夹中的Inf 复制它并命名为任何名称，比如myname.inf 编辑myname。Inf和添加行如上所述，只修改为您的特定电话。例如，对于BLU STUDIO 5.5 S，我根据提示在2个位置添加了以下2行。
;BLU STUDIO 5.5 S
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C02&REV_0216&MI_00
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C02&MI_00
请注意，您将这些行添加到32位和64位部分中，以与教程中的示例相匹配。
Now go back up to the unknown device that appeared in Device Manager when you switched on device USB debugging and right click on this item (has yellow exclamation mark), right click on it and then select Update Driver Software, and then Browse My Computer, Let Me Pick, click on the Have Disk button and browse to find the myname.inf. Continue to agree to all the prompts warning you it might not be the right driver. As the final step, Windows should have identified the device as Android ADB Interface and once that is done, you should be able to go back, open your CMD window and run the command "adb devices" as instructed in this tutorial and now you should see that the phone is now discovered and communicating.
现在您可以开始使用adb命令了。
这种情况似乎出现在一些ADB驱动程序中。我在一些谷歌设备上遇到过同样的问题，安装Universal ADB windows驱动程序每次都为我解决了这个问题。
如果设备处于MTP模式，则调试时可能不可见。有些设备只在PTP模式下工作(甚至在“仅充电”模式下)。
可以在“设置”中更改>开发人员选项>网络> USB默认配置> PTP。
此外，你会在你的android设备上收到一个通知，要求你确认USB配置设置的变化，并允许它。
注意:您可以通过以下链接打开开发人员选项: 启用开发人员选项
进入设备管理器，检查硬件id。 检查usb。Inf文件中列出了设备 如果不是，添加设备硬件id并从设备管理器中安装它。
对于我的Nexus 6P来说，从谷歌下载驱动程序帮助解决了这个问题。下面是带有文档的URL。在这里你可以下载驱动程序本身。
附注:我看到一些人建议从互联网上随机下载一些驱动程序。虽然这可能会有所帮助，但在我看来，从非官方的地方下载未知的驱动程序太危险了。所以谷歌的一个对我来说很好:)
