对于Android Studio 1.0.2:

首先确保Intel x86模拟器加速器安装。在SDK管理器中检查它。如果没有，那么从那里开始安装。

打开Android SDK文件夹， * * {SDK_FOLDER} \配件\英特尔\ Hardware_Accelerated_Execution_Manager * *

在那里您将找到silent_install.bat。

运行它。它将创建haxm_silent_run.log。之后，关闭并重新启动Android Studio，然后运行应用程序。

它会起作用的。如果出现问题，请检查haxm_silent_run.log文件。

While creating a Virtual Device select the ARM system Image. Others have suggested to install HAXM, but the truth is haxm wont work on amd platform or even if it does as android studio does not supports amd-vt on windows the end result will still be a very very slow emulator to run and operate. My recommendation would be to either use alternative emulator like Genymotion (works like a charm with Gapps installed) or switch to linux as then you will get the benefit of amd-vt and emulator will run a lot faster.

Open SDK Manager and download Intel x86 Emulator Accelerator (HAXM installer) if you haven't. Now go to your SDK directory (C:\users\username\AppData\Local\Android\sdk, generally). In this directory, go to extras → Intel → Hardware_Accelerated_Execution_Manager and run the file named "intelhaxm-android.exe". In case you get an error like "Intel virtualization technology (vt,vt-x) is not enabled", go to your BIOS settings and enable hardware virtualization. Restart Android Studio and then try to start the AVD again.

显示模拟器窗口可能需要一到两分钟。

所以我有这个问题，似乎除非你在Linux上，否则你将无法使用HAXM。[编辑:这是如果你有一个AMD芯片(非英特尔)，当然，这就是问题所在]

如Android网站所述;

Many modern CPUs provide extensions for running virtual machines (VMs) more efficiently. Taking advantage of these extensions with the Android emulator requires some additional configuration of your development system, but can significantly improve the execution speed. Before attempting to use this type of acceleration, you should first determine if your development system’s CPU supports one of the following virtualization extensions technologies: Intel Virtualization Technology (VT, VT-x, vmx) extensions > AMD Virtualization (AMD-V, SVM) extensions (only supported for Linux)

正如其他人所提到的，Genymotion可能是一种解决方案。

确保在SDK管理器上安装了HAXM安装程序。

下载后，确保运行位于: {SDK_FOLDER} \配件\ \ Hardware_Accelerated_Execution_Manager \ intelhaxm.exe英特尔

注意:在Android Studio中，命令“intelhaxm.exe”已更改为“intelhaxm-android.exe”

如果你在安装过程中得到“VT不支持”的错误，禁用windows功能上的Hyper-V。dism.exe /Online /Disable-Feature:Microsoft-Hyper-V。您还需要在BIOS中启用“虚拟化技术”

我不知道这是否有效，但你可以试试这个:

很明显，模拟器团队需要更好地传播关于如何在Windows上使用AMD模拟器的信息。这个问题似乎每周都会出现。

首先，卸载HAXM。

下一步，进入https://developer.android.com/studio/run/emulator-acceleration#vm-windows，按照使用Windows Hypervisor平台配置虚拟机加速的说明操作

最后，如果你的模拟器实例帧率很低，请参考同一页中为Android UI启用Skia渲染的说明。