在更新到Android Studio 2后，当我试图运行我的应用程序并选择一个模拟器时，我等待模拟器启动，它突然被杀死。我可以看到模拟器进程几分钟，但从来没有GUI。在Android studio中，我得到了错误
android studio Error while waiting for the device: The emulator process for AVD was killed
即使我在Android Studio之外运行模拟器也会发生这种情况。我试用了Android 6和基于Android 4.4的模拟器。 在Windows 7 x64 PC上运行。类似于另一个StackOverflow帖子被关闭。我尝试了各种ram、VM堆和分辨率设置。
当前回答
转到设置avd，将“图形”从“快速启动”改为“冷启动”。
其他回答
解决此错误的最佳5个选项，avd的模拟器进程被杀死
given option are checkpoints, check it out one by one.
Error Solution Option 1
Possiblity:
HAXM may not installed in System
HAXM - Hardware Accelerated Execution Manager
Solution:
SDK Manager > Check for HAXM installer
install it, if HAXM not installed
=======================================
Error Solution Option 2
Possiblity :
Low disk size to load Emulator
Latest AVD with API level 30+ required approx 7 GB disk space
Solution:
Free space from disk where AVD is located
=======================================
Error Solution Option 3
Possiblity :
Configured AVD API may not available in SDK Manager
As an Example:
if Emulator with API level 30, same package of API 30 should be installed in SDK
Solution:
Install same version of SDK Platfrom from SDK manager,
as same as Emulator – AVD API
=======================================
Error Solution Option 4
Possiblity :
Configuration error in Old AVD
Solution:
Recreate AVD with latest available update
Help > check for update, if component Android Emulator Update is available, install it
delete older AVD and create Fresh AVD
=======================================
Error Solution Option 5
Possiblity :
Embedded AVD not properly load with available image
Solution:
Launch AVD as independent component,
After success close it and lauch within Android Studio
Emulator inside Android Studio
=======================================
before apply all of above once restart you System, try it.
有关视频支持的更多帮助，请参阅如何修复AVD被杀死 我想它可能对你有帮助。
在我的Pop OS 20.04 LTS上，当图形驱动程序更新时，我得到了这个，但系统重新启动正在等待。在完全重新启动系统时，模拟器映像工作正常。
PS.在我的机器上，每当图形驱动程序更新时，系统需要重新启动，否则一些应用程序，如Zoom，在这种情况下，Android模拟器开始意外崩溃。
总结一下:
Install and reinstall HAXM 7.5.6 (only available version) under 'Android SDK' settings. Try downloading it manually, even other versions (they don't work with Android SDK), installing it from the Android/Sdk folder, etc. sc query intelhaxm in cmd should show if it is running correctly. Virtualization is enabled in your BIOS and has been tested Made sure the PATH variables are correct (ANDROID_HOME / ANDROID_SDK_ROOT) but NOT (ANDROID_SDK_HOME) to the folder in your settings per Here. Otherwise, you will see EVENTS on the Android Studio splash screen. Try unchecking / rechecking Launch in a tool window in Emulator settings (and even Enable Device Frame in AVD settings) Try rebuilding in several different combinations of android, different phones, etc (but with same levels and packages ... 30 for example) Try Rebooting in several different configurations Make sure all SDK Tools are up-to-date, and even try a fresh install of Android Studio. However, tried removing all of them, and adding them back. Check your space, try to have 25GB maybe or more free Check for Virtual Box, Antivirus Software, etc. Open Android Studio with Administrator privileges
运行在双显示器/坞站上?
A)在不插任何插头的情况下运行模拟器，然后插回显示器!(我知道很奇怪)……或者更好的是…… B)创建一个新的硬件配置文件，它将使您能够将图形:自动更改为软件。
如果您使用McAfee防病毒和Windows 10，这可能会帮助您:
根据snehatilak的建议，卸载并重新安装Android Emulator最初对我的情况有所帮助，但第二天模拟器又死机了。
我发现McAfee杀毒软件已经隔离了文件avd .conf，原来是在C:\Users[username].android\avd[avdImage]\
在恢复AVD.conf并从扫描中排除它之后，它似乎又好了。
这一切都始于2021年2月2日，我猜是在McAfee更新之后。
以下是步骤:
首先转到“设置”下的“隔离项目”并恢复AVD.conf文件
然后转到“设置”下的“实时扫描”，在你创建的每个模拟器中排除AVD.conf。(位于C:\Users[username].android\avd[avdImage])
以我为例，在我尝试了较低版本的Pixel和Android后，问题得到了解决。
