使用grep从ifconfig中过滤IP地址:

ifconfig | grep eo的inet (addr:) ?([0 - 9] * \){3}[0 - 9] *’| grep eo”([0 - 9]* \){3}[0 - 9]*’| grep - v 127.0.0.1的

或者用sed:

ifconfig | sed -En 's/127.0.0.1//;* inet (addr) ?(([0 - 9] * \){3}[0 - 9] *)。* / \ 2 / p”

如果你只对某些接口感兴趣，比如wlan0、eth0等，那么:

ifconfig wlan0 | ...

例如，您可以在.bashrc中使用别名来创建自己的命令myip。

别名myip =“ifconfig | sed -En’s / 127 . 0 0。1;s /。* inet(键入https://www.bittrex.com:) ?(0 - 9) *[\。)0 - 9]{3}[*)* \ 2 / p’”。

一个更简单的方法是hostname -I (hostname -I用于旧版本的hostname，但请参阅注释)。但是，这仅适用于Linux。

下面的代码可以在Linux上运行，但不能在OSX上运行。

这根本不依赖于DNS，即使/etc/hosts没有正确设置(1是1.0.0.0的简写)，它也能工作:

ip route get 1 | awk '{print $NF;exit}'

或者避免awk，使用谷歌的公共DNS 8.8.8.8。

ip route get 8.8.8.8 | head -1 | cut -d' ' -f8

一种不太可靠的方式:(见下面的评论)

hostname -I | cut -d' ' -f1

对于linux，你需要的是这个命令:

ifconfig $1|sed -n 2p|awk '{ print $2 }'|awk -F : '{ print $2 }'

在你的shell中输入这个，你就会知道你的ip。

这适用于Linux和OSX

这将获得与默认路由关联的接口

NET_IF=`netstat -rn | awk '/^0.0.0.0/ {thif=substr($0,74,10); print thif;} /^default.*UG/ {thif=substr($0,65,10); print thif;}'`

使用上面发现的接口，获取ip地址。

NET_IP=`ifconfig ${NET_IF} | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*' | grep -v '127.0.0.1'`

OSX

uname -a

达尔文笔记本14.4.0达尔文内核版本14.4.0:Thu 5月28日11:35:04 PDT 2015;根:xnu-2782.30.5 ~ 1 / RELEASE_X86_64 x86_64

echo $NET_IF

en5

echo $NET_IP

192.168.0.130

Linux CentOS

uname -a

Linux dev-cil.medfx。当地2.6.18-164。el5xen 1 SMP Thu Sep 3 04:03:03 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux

echo $NET_IF

eth0

echo $NET_IP

192.168.46.10

在一个默认网关的网络中查找这台计算机的IP地址(例如排除所有虚拟网络，docker桥接器)。互联网网关，wifi网关，以太网

ip route| grep $(ip route |grep default | awk '{ print $5 }') | grep -v "default" | awk '/scope/ { print $9 }'

适用于Linux。

测试:

➜  ~ ip route| grep $(ip route |grep default | awk '{ print $5 }') | grep -v "default" | awk '/scope/ { print $9 }'
192.168.0.114

➜  reverse-networking git:(feature/type-local) ✗ ifconfig wlp2s0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.114  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::d3b9:8e6e:caee:444  prefixlen 64  scopeid 0x20<link>
        ether ac:x:y:z  txqueuelen 1000  (Ethernet)
        RX packets 25883684  bytes 27620415278 (25.7 GiB)
        RX errors 0  dropped 27  overruns 0  frame 0
        TX packets 7511319  bytes 1077539831 (1.0 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

我浏览了很多链接(StackExchange, AskUbuntu, StackOverflow等)，并决定将所有最好的解决方案合并到一个shell脚本中。

在我看来，这两个qa是我见过的最好的:

如何在shell脚本中获得我的外部IP地址? https://unix.stackexchange.com/q/22615

我如何找到我的内部ip地址? https://askubuntu.com/a/604691

下面是基于rsp在他的存储库(https://github.com/rsp/scripts/)中分享的一些想法的解决方案。

有些人可能会说这个脚本对于这么简单的任务来说是非常大的，但我想让它在使用时尽可能地简单和灵活。它支持简单的配置文件，允许重新定义默认值。

它在Cygwin, MINGW和Linux (Red Hat)下成功测试。

显示内部IP地址

myip -i

显示外部IP地址

myip -e

源代码，也可通过链接:https://github.com/ildar-shaimordanov/tea-set/blob/master/home/bin/myip。配置文件的示例在那里，在主脚本旁边。

#!/bin/bash

# =========================================================================
#
# Getting both internal and external IP addresses used for outgoing 
# Internet connections.
#
# Internal IP address is the IP address of your computer network interface 
# that would be used to connect to Internet.
#
# External IP address is the IP address that is visible by external 
# servers that you connect to over Internet.
#
# Copyright (C) 2016 Ildar Shaimordanov
#
# =========================================================================

# Details of the actual implementation are based on the following QA:
#
# How can I get my external IP address in a shell script?
# https://unix.stackexchange.com/q/22615
#
# How do I find my internal ip address?
# https://askubuntu.com/a/604691

# =========================================================================

for f in \
    "$( dirname "$0" )/myip.conf" \
    ~/.myip.conf \
    /etc/myip.conf
do
    [ -f "$f" ] && {
        . "$f"
        break
    }
done

# =========================================================================

show_usage() {
    cat - <<HELP
USAGE
  $( basename "$0" ) [OPTIONS]

DESCRIPTION
  Display the internal and external IP addresses

OPTIONS
  -i  Display the internal IP address
  -e  Display the external IP address
  -v  Turn on verbosity
  -h  Print this help and exit
HELP
    exit
}

die() {
    echo "$( basename "$0" ): $@" >&2
    exit 2
}

# =========================================================================

show_internal=""
show_external=""
show_verbose=""

while getopts ":ievh" opt
do
    case "$opt" in
    i )
        show_internal=1
        ;;
    e )
        show_external=1
        ;;
    v )
        show_verbose=1
        ;;
    h )
        show_usage
        ;;
    \? )
        die "Illegal option: $OPTARG"
        ;;
    esac
done

if [ -z "$show_internal" -a -z "$show_external" ]
then
    show_internal=1
    show_external=1
fi

# =========================================================================

# Use Google's public DNS to resolve the internal IP address
[ -n "$TARGETADDR" ] || TARGETADDR="8.8.8.8"

# Query the specific URL to resolve the external IP address
[ -n "$IPURL" ] || IPURL="ipecho.net/plain"

# Define explicitly $IPCMD to gather $IPURL using another tool
[ -n "$IPCMD" ] || {
    if   which curl >/dev/null 2>&1
    then
        IPCMD="curl -s"
    elif which wget >/dev/null 2>&1
    then
        IPCMD="wget -qO -"
    else
        die "Neither curl nor wget installed"
    fi
}

# =========================================================================

resolveip() {
    {
        gethostip -d "$1" && return
        getent ahostsv4 "$1" \
        | grep RAW \
        | awk '{ print $1; exit }' 
    } 2>/dev/null
}

internalip() {
    [ -n "$show_verbose" ] && printf "Internal: "

    case "$( uname | tr '[:upper:]' '[:lower:]' )" in
    cygwin* | mingw* | msys* )
        netstat -rn \
        | grep -w '0.0.0.0' \
        | awk '{ print $4 }'
        return
        ;;
    esac

    local t="$( resolveip "$TARGETADDR" )"
    [ -n "$t" ] || die "Cannot resolve $TARGETADDR"
    ip route get "$t" \
    | awk '{ print $NF; exit }'
}

externalip() {
    [ -n "$show_verbose" ] && printf "External: "

    eval $IPCMD "$IPURL" $IPOPEN
}

# =========================================================================

[ -n "$show_internal" ] && internalip
[ -n "$show_external" ] && externalip

# =========================================================================

# EOF