我正在使用来自reddit的进度。我喜欢它，因为它可以在一行中打印每一项的进度，而且它不应该从程序中删除打印输出。

编辑:固定链接

好吧，这里是工作的代码，我在发布之前测试了它:

import sys
def prg(prog, fillchar, emptchar):
    fillt = 0
    emptt = 20
    if prog < 100 and prog > 0:
        prog2 = prog/5
        fillt = fillt + prog2
        emptt = emptt - prog2
        sys.stdout.write("\r[" + str(fillchar)*fillt + str(emptchar)*emptt + "]" + str(prog) + "%")
        sys.stdout.flush()
    elif prog >= 100:
        prog = 100
        prog2 = prog/5
        fillt = fillt + prog2
        emptt = emptt - prog2
        sys.stdout.write("\r[" + str(fillchar)*fillt + str(emptchar)*emptt + "]" + str(prog) + "%" + "\nDone!")
        sys.stdout.flush()
    elif prog < 0:
        prog = 0
        prog2 = prog/5
        fillt = fillt + prog2
        emptt = emptt - prog2
        sys.stdout.write("\r[" + str(fillchar)*fillt + str(emptchar)*emptt + "]" + str(prog) + "%" + "\nHalted!")
        sys.stdout.flush()

优点:

20个字符条(每5个字符对应1个字符) 自定义填充字符 自定义空字符 暂停(任何低于0的数字) 完成(100及100以上的任何数字) 进度计数(0-100(以下和以上用于特殊功能)) 条形图旁边的百分数，这是一条单线

缺点:

仅支持整数(但可以通过将除法改为整数除法来支持整数，因此只需将prog2 = prog/5更改为prog2 = int(prog/5))

我写了一个简单的进度条:

def bar(total, current, length=10, prefix="", filler="#", space=" ", oncomp="", border="[]", suffix=""):
    if len(border) != 2:
        print("parameter 'border' must include exactly 2 symbols!")
        return None

    print(prefix + border[0] + (filler * int(current / total * length) +
                                      (space * (length - int(current / total * length)))) + border[1], suffix, "\r", end="")
    if total == current:
        if oncomp:
            print(prefix + border[0] + space * int(((length - len(oncomp)) / 2)) +
                  oncomp + space * int(((length - len(oncomp)) / 2)) + border[1], suffix)
        if not oncomp:
            print(prefix + border[0] + (filler * int(current / total * length) +
                                        (space * (length - int(current / total * length)))) + border[1], suffix)

正如你所看到的，它有:条的长度，前缀和后缀，填充，空间，文本在条上100%(oncomp)和边界

这里有一个例子:

from time import sleep, time
start_time = time()
for i in range(10):
    pref = str((i+1) * 10) + "% "
    complete_text = "done in %s sec" % str(round(time() - start_time))
    sleep(1)
    bar(10, i + 1, length=20, prefix=pref, oncomp=complete_text)

正在进行中:

30% [######              ]

Out on complete:

100% [   done in 9 sec   ] 

python终端进度条代码

import sys
import time

max_length = 5
at_length = max_length
empty = "-"
used = "%"

bar = empty * max_length

for i in range(0, max_length):
    at_length -= 1

    #setting empty and full spots
    bar = used * i
    bar = bar+empty * at_length

    #\r is carriage return(sets cursor position in terminal to start of line)
    #\0 character escape

    sys.stdout.write("[{}]\0\r".format(bar))
    sys.stdout.flush()

    #do your stuff here instead of time.sleep
    time.sleep(1)

sys.stdout.write("\n")
sys.stdout.flush()

对于python 3:

def progress_bar(current_value, total):
    increments = 50
    percentual = ((current_value/ total) * 100)
    i = int(percentual // (100 / increments ))
    text = "\r[{0: <{1}}] {2}%".format('=' * i, increments, percentual)
    print(text, end="\n" if percentual == 100 else "")

它只有不到10行代码。

要点如下:https://gist.github.com/vladignatyev/06860ec2040cb497f0f3

import sys


def progress(count, total, suffix=''):
    bar_len = 60
    filled_len = int(round(bar_len * count / float(total)))

    percents = round(100.0 * count / float(total), 1)
    bar = '=' * filled_len + '-' * (bar_len - filled_len)

    sys.stdout.write('[%s] %s%s ...%s\r' % (bar, percents, '%', suffix))
    sys.stdout.flush()  # As suggested by Rom Ruben