我从我的GitHub帐户克隆了一个Git存储库到我的电脑。
我想使用我的电脑和笔记本电脑,但只有一个GitHub帐户。
当我尝试使用我的电脑推送到GitHub或从GitHub中拉取时,它需要用户名和密码,但当我使用笔记本电脑时不需要!
我不想每次与origin交互时都键入用户名和密码。我在这里缺少什么?
我从我的GitHub帐户克隆了一个Git存储库到我的电脑。
我想使用我的电脑和笔记本电脑,但只有一个GitHub帐户。
当我尝试使用我的电脑推送到GitHub或从GitHub中拉取时,它需要用户名和密码,但当我使用笔记本电脑时不需要!
我不想每次与origin交互时都键入用户名和密码。我在这里缺少什么?
当前回答
当您使用https进行Git推送时,只需为项目配置remote.origin.url,以避免每次推送时输入用户名(或/和密码)。
如何配置remote.origin.url:
URL format: https://{username:password@}github.com/{owner}/{repo} Parameters in URL: * username
Optional, the username to use when needed.
authentication, if specified, no need to enter username again when need authentication. Don't use email; use your username that has no "@", otherwise the URL can't be parsed correctly, * password optional, the password to use when need authentication. If specified, there isn't any need to enter the password again when needing authentication. Tip: this value is stored as plain text, so for security concerns, don't specify this parameter, * e.g git config remote.origin.url https://eric@github.com/eric/myproject
@更新-使用ssh
我认为使用ssh协议是比https更好的解决方案,尽管设置步骤稍微复杂一些。
粗略步骤:
使用命令创建ssh密钥,例如Linux上的ssh keygen,windows上的msysgit提供类似的命令。将私钥保存在本地计算机上的适当位置,例如~/.ssh。然后通过ssh-add命令将其添加到ssh代理。将公钥上传到Git服务器。将Git存储库的remote.origin.url更改为ssh样式,例如。,git@gitlab.com:myaccount/myrepo.git然后,当拉或推时,永远不需要输入用户名或密码。
提示:
如果您的ssh密钥有密码短语,则默认情况下,您需要在每次重新启动计算机后首次使用密钥时输入密码。
@更新-在https和ssh协议之间切换。
只需更改remote.origin.url就足够了,或者您可以直接编辑repo_home/.git/config来更改值(例如在Linux上使用vi)。
通常我为每个协议添加一行,并使用#注释掉其中一行。
E.g.
[remote "origin"] url = git@gitlab.com:myaccount/myrepo.git # url = https://myaccount@gitlab.com/myaccount/myrepo.git fetch = +refs/heads/*:refs/remotes/origin/*
其他回答
这就是对我有用的:
git remote set-url origin https://username@github.com/username/reponame.git
例子:
git remote set-url origin https://jsmith@github.com/jsmith/master.git
一个常见的原因是使用默认(HTTPS)而不是SSH进行克隆。您可以通过转到存储库,单击“克隆或下载”,然后单击URL字段上方的“使用SSH”按钮,然后更新源远程的URL,如下所示:
git remote set-url origin git@github.com:username/repo.git
您可以使用以下方法检查是否已将远程添加为HTTPS或SSH:
git remote -v
GitHub中记录了这一点:将远程URL从HTTPS切换到SSH。
我刚刚遇到了同样的问题,我找到的最简单的解决方案是使用SSH URL而不是HTTPS URL:
ssh://git@github.com/username/repo.git
而不是这样:
https://github.com/username/repo.git
现在,您可以只使用SSH密钥而不是用户名和密码进行验证。
HTTPS更新:
GitHub为Windows推出了一个新程序,在您使用HTTPS时存储您的凭据:
要使用:
从此处下载程序运行程序后,它将编辑.gitconfig文件。重新检查它是否编辑了正确的.gitconfig,以防出现多个错误。如果它没有编辑正确的文件,请将以下内容添加到.gitconfig中[凭据]助手=!'C: \\Path\\To\\Your\\Downloaded\\File\\git credential winstore.exe'注意[credential]后面的换行符。这是必需的。打开命令行客户端,尝试git push origin master一次。如果它要求您输入密码,请输入密码,您就完成了。密码已保存!
对我有用的是编辑.git/config并使用
[remote "origin"]
url = https://<login>:<password>@gitlab.com(...).git
不用说,这是一种不安全的密码存储方式,但在某些环境/情况下,这可能不是问题。