所以你想要一个详尽的答案?这里有一个有趣的，希望完整的，相当长的列表给你:)

http://jim-mcbeath.blogspot.com/2008/12/scala-operator-cheat-sheet.html

(免责声明-这篇文章写于2008年，所以可能有点过时)

!! AbstractActor
!! Actor // Sends msg to this actor and immediately ...
!! Proxy
! Actor // Sends msg to this actor (asynchronous).
! Channel // Sends a message to this Channel.
! OutputChannel // Sends msg to this ...
! Proxy // Sends msg to this ...
!= Any // o != arg0 is the same as !(o == (arg0)).
!= AnyRef
!= Boolean
!= Byte
!= Char
!= Double
!= Float
!= Int
!= Long
!= Short
!? AbstractActor
!? Actor // Sends msg to this actor and awaits reply ...
!? Channel // Sends a message to this Channel and ...
!? Proxy
% BigInt // Remainder of BigInts
% Byte
% Char
% Double
% Float
% Int
% Long
% Short
% Elem // Returns a new element with updated attributes, resolving namespace uris from this element's scope. ...
&&& Parsers.Parser
&& Boolean
&+ NodeBuffer // Append given object to this buffer, returns reference on this NodeBuffer ...
& BigInt // Bitwise and of BigInts
& Boolean
& Byte
& Char
& Enumeration.Set32 // Equivalent to * for bit sets. ...
& Enumeration.Set64 // Equivalent to * for bit sets. ...
& Enumeration.SetXX // Equivalent to * for bit sets. ...
& Int
& Long
& Short
&~ BigInt // Bitwise and-not of BigInts. Returns a BigInt whose value is (this & ~that).
&~ Enumeration.Set32 // Equivalent to - for bit sets. ...
&~ Enumeration.Set64 // Equivalent to - for bit sets. ...
&~ Enumeration.SetXX // Equivalent to - for bit sets. ...
>>> Byte
>>> Char
>>> Int
>>> Long
>>> Short
>> BigInt // (Signed) rightshift of BigInt
>> Byte
>> Char
>> Int
>> Long
>> Short
>> Parsers.Parser // Returns into(fq)
>> Parsers.Parser // Returns into(fq)
> BigDecimal // Greater-than comparison of BigDecimals
> BigInt // Greater-than comparison of BigInts
> Byte
> Char
> Double
> Float
> Int
> Long
> Ordered
> PartiallyOrdered
> Short
>= BigDecimal // Greater-than-or-equals comparison of BigDecimals
>= BigInt // Greater-than-or-equals comparison of BigInts
>= Byte
>= Char
>= Double
>= Float
>= Int
>= Long
>= Ordered
>= PartiallyOrdered
>= Short
<< BigInt // Leftshift of BigInt
<< Byte
<< Char
<< Int
<< Long
<< Short
<< Buffer // Send a message to this scriptable object.
<< BufferProxy // Send a message to this scriptable object.
<< Map // Send a message to this scriptable object.
<< MapProxy // Send a message to this scriptable object.
<< Scriptable // Send a message to this scriptable object.
<< Set // Send a message to this scriptable object.
<< SetProxy // Send a message to this scriptable object.
<< SynchronizedBuffer // Send a message to this scriptable object.
<< SynchronizedMap // Send a message to this scriptable object.
<< SynchronizedSet // Send a message to this scriptable object.
< BigDecimal // Less-than of BigDecimals
< BigInt // Less-than of BigInts
< Byte
< Char
< Double
< Float
< Int
< Long
< Ordered
< PartiallyOrdered
< Short
< OffsetPosition // Compare this position to another, by first comparing their line numbers, ...
< Position // Compare this position to another, by first comparing their line numbers, ...
<= BigDecimal // Less-than-or-equals comparison of BigDecimals
<= BigInt // Less-than-or-equals comparison of BigInts
<= Byte
<= Char
<= Double
<= Float
<= Int
<= Long
<= Ordered
<= PartiallyOrdered
<= Short
<~ Parsers.Parser // A parser combinator for sequential composition which keeps only the left result
** Enumeration.SetXX
** Set // Intersect. It computes an intersection with set that. ...
** Set // This method is an alias for intersect. ...
* BigDecimal // Multiplication of BigDecimals
* BigInt // Multiplication of BigInts
* Byte
* Char
* Double
* Float
* Int
* Long
* Short
* Set
* RichString // return n times the current string
* Parsers.Parser // Returns a parser that repeatedly parses what this parser parses, interleaved with the `sep' parser. ...
* Parsers.Parser // Returns a parser that repeatedly parses what this parser parses
* Parsers.Parser // Returns a parser that repeatedly parses what this parser parses, interleaved with the `sep' parser. ...
* Parsers.Parser // Returns a parser that repeatedly parses what this parser parses, interleaved with the `sep' parser.
* Parsers.Parser // Returns a parser that repeatedly parses what this parser parses
++: ArrayBuffer // Prepends a number of elements provided by an iterable object ...
++: Buffer // Prepends a number of elements provided by an iterable object ...
++: BufferProxy // Prepends a number of elements provided by an iterable object ...
++: SynchronizedBuffer // Prepends a number of elements provided by an iterable object ...
++ Array // Returns an array consisting of all elements of this array followed ...
++ Enumeration.SetXX
++ Iterable // Appends two iterable objects.
++ IterableProxy // Appends two iterable objects.
++ Iterator // Returns a new iterator that first yields the elements of this ...
++ List // Appends two list objects.
++ RandomAccessSeq // Appends two iterable objects.
++ RandomAccessSeqProxy // Appends two iterable objects.
++ Seq // Appends two iterable objects.
++ SeqProxy // Appends two iterable objects.
++ IntMap // Add a sequence of key/value pairs to this map.
++ LongMap // Add a sequence of key/value pairs to this map.
++ Map // Add a sequence of key/value pairs to this map.
++ Set // Add all the elements provided by an iterator ...
++ Set // Add all the elements provided by an iterator to the set.
++ SortedMap // Add a sequence of key/value pairs to this map.
++ SortedSet // Add all the elements provided by an iterator ...
++ Stack // Push all elements provided by the given iterable object onto ...
++ Stack // Push all elements provided by the given iterator object onto ...
++ TreeHashMap
++ TreeHashMap // Add a sequence of key/value pairs to this map.
++ Collection // Operator shortcut for addAll.
++ Set // Operator shortcut for addAll.
++ ArrayBuffer // Appends two iterable objects.
++ Buffer // Appends a number of elements provided by an iterable object ...
++ Buffer // Appends a number of elements provided by an iterator ...
++ Buffer // Appends two iterable objects.
++ BufferProxy // Appends a number of elements provided by an iterable object ...
++ Map // Add a sequence of key/value pairs to this map.
++ MapProxy // Add a sequence of key/value pairs to this map.
++ PriorityQueue
++ Set // Add all the elements provided by an iterator ...
++ SynchronizedBuffer // Appends a number of elements provided by an iterable object ...
++ RichString // Appends two iterable objects.
++ RichStringBuilder // Appends a number of elements provided by an iterable object ...
++ RichStringBuilder // Appends two iterable objects.
++= Map // Add a sequence of key/value pairs to this map.
++= MapWrapper // Add a sequence of key/value pairs to this map.
++= ArrayBuffer // Appends a number of elements in an array
++= ArrayBuffer // Appends a number of elements provided by an iterable object ...
++= ArrayStack // Pushes all the provided elements onto the stack.
++= Buffer // Appends a number of elements in an array
++= Buffer // Appends a number of elements provided by an iterable object ...
++= Buffer // Appends a number of elements provided by an iterator
++= BufferProxy // Appends a number of elements provided by an iterable object ...
++= Map // Add a sequence of key/value pairs to this map.
++= MapProxy // Add a sequence of key/value pairs to this map.
++= PriorityQueue // Adds all elements provided by an Iterable object ...
++= PriorityQueue // Adds all elements provided by an iterator into the priority queue.
++= PriorityQueueProxy // Adds all elements provided by an Iterable object ...
++= PriorityQueueProxy // Adds all elements provided by an iterator into the priority queue.
++= Queue // Adds all elements provided by an Iterable object ...
++= Queue // Adds all elements provided by an iterator ...
++= QueueProxy // Adds all elements provided by an Iterable object ...
++= QueueProxy // Adds all elements provided by an iterator ...
++= Set // Add all the elements provided by an iterator ...
++= SetProxy // Add all the elements provided by an iterator ...
++= Stack // Pushes all elements provided by an Iterable object ...
++= Stack // Pushes all elements provided by an iterator ...
++= StackProxy // Pushes all elements provided by an Iterable object ...
++= StackProxy // Pushes all elements provided by an iterator ...
++= SynchronizedBuffer // Appends a number of elements provided by an iterable object ...
++= SynchronizedMap // Add a sequence of key/value pairs to this map.
++= SynchronizedPriorityQueue // Adds all elements provided by an Iterable object ...
++= SynchronizedPriorityQueue // Adds all elements provided by an iterator into the priority queue.
++= SynchronizedQueue // Adds all elements provided by an Iterable object ...
++= SynchronizedQueue // Adds all elements provided by an iterator ...
++= SynchronizedSet // Add all the elements provided by an iterator ...
++= SynchronizedStack // Pushes all elements provided by an Iterable object ...
++= SynchronizedStack // Pushes all elements provided by an iterator ...
++= RichStringBuilder // Appends a number of elements provided by an iterable object ...
+: ArrayBuffer // Prepends a single element to this buffer and return ...
+: Buffer // Prepend a single element to this buffer and return ...
+: BufferProxy // Prepend a single element to this buffer and return ...
+: ListBuffer // Prepends a single element to this buffer. It takes constant ...
+: ObservableBuffer // Prepend a single element to this buffer and return ...
+: SynchronizedBuffer // Prepend a single element to this buffer and return ...
+: RichStringBuilder // Prepend a single element to this buffer and return ...
+: BufferWrapper // Prepend a single element to this buffer and return ...
+: RefBuffer // Prepend a single element to this buffer and return ...
+ BigDecimal // Addition of BigDecimals
+ BigInt // Addition of BigInts
+ Byte
+ Char
+ Double
+ Enumeration.SetXX // Create a new set with an additional element.
+ Float
+ Int
+ List
+ Long
+ Short
+ EmptySet // Create a new set with an additional element.
+ HashSet // Create a new set with an additional element.
+ ListSet.Node // This method creates a new set with an additional element.
+ ListSet // This method creates a new set with an additional element.
+ Map
+ Map // Add a key/value pair to this map.
+ Map // Add two or more key/value pairs to this map.
+ Queue // Creates a new queue with element added at the end ...
+ Queue // Returns a new queue with all all elements provided by ...
+ Set // Add two or more elements to this set.
+ Set // Create a new set with an additional element.
+ Set1 // Create a new set with an additional element.
+ Set2 // Create a new set with an additional element.
+ Set3 // Create a new set with an additional element.
+ Set4 // Create a new set with an additional element.
+ SortedMap // Add a key/value pair to this map.
+ SortedMap // Add two or more key/value pairs to this map.
+ SortedSet // Create a new set with an additional element.
+ Stack // Push all elements provided by the given iterable object onto ...
+ Stack // Push an element on the stack.
+ TreeSet // A new TreeSet with the entry added is returned,
+ Buffer // adds "a" from the collection. Useful for chaining.
+ Collection // adds "a" from the collection. Useful for chaining.
+ Map // Add a key/value pair to this map.
+ Set // adds "a" from the collection. Useful for chaining.
+ Buffer // Append a single element to this buffer and return ...
+ BufferProxy // Append a single element to this buffer and return ...
+ Map // Add a key/value pair to this map.
+ Map // Add two or more key/value pairs to this map.
+ MapProxy // Add a key/value pair to this map.
+ MapProxy // Add two or more key/value pairs to this map.
+ ObservableBuffer // Append a single element to this buffer and return ...
+ PriorityQueue
+ Set // Add a new element to the set.
+ Set // Add two or more elements to this set.
+ SynchronizedBuffer // Append a single element to this buffer and return ...
+ Parsers.Parser // Returns a parser that repeatedly (at least once) parses what this parser parses.
+ Parsers.Parser // Returns a parser that repeatedly (at least once) parses what this parser parses.
+= Collection // adds "a" from the collection.
+= Map // Add a key/value pair to this map.
+= ArrayBuffer // Appends a single element to this buffer and returns ...
+= ArrayStack // Alias for push.
+= BitSet // Sets i-th bit to true. ...
+= Buffer // Append a single element to this buffer.
+= BufferProxy // Append a single element to this buffer.
+= HashSet // Add a new element to the set.
+= ImmutableSetAdaptor // Add a new element to the set.
+= JavaSetAdaptor // Add a new element to the set.
+= LinkedHashSet // Add a new element to the set.
+= ListBuffer // Appends a single element to this buffer. It takes constant ...
+= Map // Add a key/value pair to this map.
+= Map // Add two or more key/value pairs to this map.
+= Map // This method defines syntactic sugar for adding or modifying ...
+= MapProxy // Add a key/value pair to this map.
+= MapProxy // Add two or more key/value pairs to this map.
+= ObservableSet // Add a new element to the set.
+= PriorityQueue // Add two or more elements to this set.
+= PriorityQueue // Inserts a single element into the priority queue.
+= PriorityQueueProxy // Inserts a single element into the priority queue.
+= Queue // Inserts a single element at the end of the queue.
+= QueueProxy // Inserts a single element at the end of the queue.
+= Set // Add a new element to the set.
+= Set // Add two or more elements to this set.
+= SetProxy // Add a new element to the set.
+= Stack // Pushes a single element on top of the stack.
+= StackProxy // Pushes a single element on top of the stack.
+= SynchronizedBuffer // Append a single element to this buffer.
+= SynchronizedMap // Add a key/value pair to this map.
+= SynchronizedMap // Add two or more key/value pairs to this map.
+= SynchronizedPriorityQueue // Inserts a single element into the priority queue.
+= SynchronizedQueue // Inserts a single element at the end of the queue.
+= SynchronizedSet // Add a new element to the set.
+= SynchronizedStack // Pushes a single element on top of the stack.
+= RichStringBuilder // Append a single element to this buffer.
+= Reactions // Add a reaction.
+= RefBuffer // Append a single element to this buffer.
+= CachedFileStorage // adds a node, setting this.dirty to true as a side effect
+= IndexedStorage // adds a node, setting this.dirty to true as a side effect
+= SetStorage // adds a node, setting this.dirty to true as a side effect
-> Map.MapTo
-> Map.MapTo
-- List // Computes the difference between this list and the given list ...
-- Map // Remove a sequence of keys from this map
-- Set // Remove all the elements provided by an iterator ...
-- SortedMap // Remove a sequence of keys from this map
-- MutableIterable // Operator shortcut for removeAll.
-- Set // Operator shortcut for removeAll.
-- Map // Remove a sequence of keys from this map
-- MapProxy // Remove a sequence of keys from this map
-- Set // Remove all the elements provided by an iterator ...
--= Map // Remove a sequence of keys from this map
--= MapProxy // Remove a sequence of keys from this map
--= Set // Remove all the elements provided by an iterator ...
--= SetProxy // Remove all the elements provided by an iterator ...
--= SynchronizedMap // Remove a sequence of keys from this map
--= SynchronizedSet // Remove all the elements provided by an iterator ...
- BigDecimal // Subtraction of BigDecimals
- BigInt // Subtraction of BigInts
- Byte
- Char
- Double
- Enumeration.SetXX // Remove a single element from a set.
- Float
- Int
- List // Computes the difference between this list and the given object ...
- Long
- Short
- EmptyMap // Remove a key from this map
- EmptySet // Remove a single element from a set.
- HashMap // Remove a key from this map
- HashSet // Remove a single element from a set.
- IntMap // Remove a key from this map
- ListMap.Node // Creates a new mapping without the given key. ...
- ListMap // This creates a new mapping without the given key. ...
- ListSet.Node // - can be used to remove a single element from ...
- ListSet // - can be used to remove a single element from ...
- LongMap // Remove a key from this map
- Map // Remove a key from this map
- Map // Remove two or more keys from this map
- Map1 // Remove a key from this map
- Map2 // Remove a key from this map
- Map3 // Remove a key from this map
- Map4 // Remove a key from this map
- Set // Remove a single element from a set.
- Set // Remove two or more elements from this set.
- Set1 // Remove a single element from a set.
- Set2 // Remove a single element from a set.
- Set3 // Remove a single element from a set.
- Set4 // Remove a single element from a set.
- SortedMap // Remove a key from this map
- SortedMap // Remove two or more keys from this map
- TreeHashMap // Remove a key from this map
- TreeMap // Remove a key from this map
- TreeSet // Remove a single element from a set.
- UnbalancedTreeMap.Node // Remove a key from this map
- UnbalancedTreeMap // Remove a key from this map
- Map // Remove a key from this map
- MutableIterable
- Set
- ListBuffer // Removes a single element from the buffer and return ...
- Map // Remove a key from this map
- Map // Remove two or more keys from this map
- MapProxy // Remove a key from this map
- MapProxy // Remove two or more keys from this map
- Set // Remove a new element from the set.
- Set // Remove two or more elements from this set.
-= Buffer // removes "a" from the collection.
-= Collection // removes "a" from the collection.
-= Map // Remove a key from this map, noop if key is not present.
-= BitSet // Clears the i-th bit.
-= Buffer // Removes a single element from this buffer, at its first occurrence. ...
-= HashMap // Remove a key from this map, noop if key is not present.
-= HashSet // Removes a single element from a set.
-= ImmutableMapAdaptor // Remove a key from this map, noop if key is not present.
-= ImmutableSetAdaptor // Removes a single element from a set.
-= JavaMapAdaptor // Remove a key from this map, noop if key is not present.
-= JavaSetAdaptor // Removes a single element from a set.
-= LinkedHashMap // Remove a key from this map, noop if key is not present.
-= LinkedHashSet // Removes a single element from a set.
-= ListBuffer // Remove a single element from this buffer. It takes linear time ...
-= Map // Remove a key from this map, noop if key is not present.
-= Map // Remove two or more keys from this map
-= MapProxy // Remove a key from this map, noop if key is not present.
-= MapProxy // Remove two or more keys from this map
-= ObservableMap // Remove a key from this map, noop if key is not present.
-= ObservableSet // Removes a single element from a set.
-= OpenHashMap // Remove a key from this map, noop if key is not present.
-= Set // Remove two or more elements from this set.
-= Set // Removes a single element from a set.
-= SetProxy // Removes a single element from a set.
-= SynchronizedMap // Remove a key from this map, noop if key is not present.
-= SynchronizedMap // Remove two or more keys from this map
-= SynchronizedSet // Removes a single element from a set.
-= Reactions // Remove the given reaction.
-= CachedFileStorage // removes a tree, setting this.dirty to true as a side effect
-= IndexedStorage // removes a tree, setting this.dirty to true as a side effect
/% BigInt // Returns a pair of two BigInts containing (this / that) and (this % that).
/: Iterable // Similar to foldLeft but can be used as ...
/: IterableProxy // Similar to foldLeft but can be used as ...
/: Iterator // Similar to foldLeft but can be used as ...
/ BigDecimal // Division of BigDecimals
/ BigInt // Division of BigInts
/ Byte
/ Char
/ Double
/ Float
/ Int
/ Long
/ Short
:/: Document
::: List
:: List
:: Document
:\ Iterable // An alias for foldRight. ...
:\ IterableProxy // An alias for foldRight. ...
:\ Iterator // An alias for foldRight. ...
== Any // o == arg0 is the same as o.equals(arg0).
== AnyRef // o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
== Boolean
== Byte
== Char
== Double
== Float
== Int
== Long
== Short
? Actor // Receives the next message from this actor's mailbox.
? Channel // Receives the next message from this Channel.
? InputChannel // Receives the next message from this Channel.
? Parsers.Parser // Returns a parser that optionally parses what this parser parses.
? Parsers.Parser // Returns a parser that optionally parses what this parser parses.
\ NodeSeq // Projection function. Similar to XPath, use this \ "foo"
\\ NodeSeq // projection function. Similar to XPath, use this \\ 'foo
^ BigInt // Bitwise exclusive-or of BigInts
^ Boolean
^ Byte
^ Char
^ Int
^ Long
^ Short
^? Parsers.Parser // A parser combinator for partial function application
^? Parsers.Parser // A parser combinator for partial function application
^^ Parsers.Parser // A parser combinator for function application
^^ Parsers.Parser // A parser combinator for function application
^^ Parsers.UnitParser // A parser combinator for function application
^^^ Parsers.Parser
| BigInt // Bitwise or of BigInts
| Boolean
| Byte
| Char
| Enumeration.Set32 // Equivalent to ++ for bit sets. Returns a set ...
| Enumeration.Set32 // Equivalent to + for bit sets. Returns a set ...
| Enumeration.Set64 // Equivalent to ++ for bit sets. Returns a set ...
| Enumeration.Set64 // Equivalent to + for bit sets. Returns a set ...
| Enumeration.SetXX // Equivalent to ++ for bit sets. Returns a set ...
| Enumeration.SetXX // Equivalent to + for bit sets. Returns a set ...
| Int
| Long
| Short
| Parsers.Parser // A parser combinator for alternative composition
| Parsers.Parser // A parser combinator for alternative composition
| Parsers.UnitParser // A parser combinator for alternative composition
|| Boolean
||| Parsers.Parser
||| Parsers.Parser // A parser combinator for alternative with longest match composition
||| Parsers.Parser // A parser combinator for alternative with longest match composition
||| Parsers.UnitParser // A parser combinator for alternative with longest match composition
~! Parsers.Parser // A parser combinator for non-back-tracking sequential composition
~! Parsers.Parser // A parser combinator for non-back-tracking sequential composition with a unit-parser
~! Parsers.Parser // A parser combinator for non-back-tracking sequential composition
~! Parsers.UnitParser // A parser combinator for non-back-tracking sequential composition with a unit-parser
~! Parsers.UnitParser // A parser combinator for non-back-tracking sequential composition
~> Parsers.Parser // A parser combinator for sequential composition which keeps only the right result
~ BigInt // Returns the bitwise complement of this BigNum
~ Parsers.OnceParser // A parser combinator for sequential composition
~ Parsers.Parser // A parser combinator for sequential composition
~ Parsers
~ Parsers.OnceParser // A parser combinator for sequential composition with a unit-parser
~ Parsers.OnceParser // A parser combinator for sequential composition
~ Parsers.Parser // A parser combinator for sequential composition with a unit-parser
~ Parsers.Parser // A parser combinator for sequential composition
~ Parsers.UnitOnceParser // A parser combinator for sequential composition with a unit-parser
~ Parsers.UnitOnceParser // A parser combinator for sequential composition
~ Parsers.UnitParser // A parser combinator for sequential composition with a unit-parser
~ Parsers.UnitParser // A parser combinator for sequential composition
unary_! Boolean
unary_+ Byte
unary_+ Char
unary_+ Double
unary_+ Float
unary_+ Int
unary_+ Long
unary_+ Short
unary_- BigDecimal // Returns a BigDecimal whose value is the negation of this BigDecimal
unary_- BigInt // Returns a BigInt whose value is the negation of this BigInt
unary_- Byte
unary_- Char
unary_- Double
unary_- Float
unary_- Int
unary_- Long
unary_- Short
unary_~ Byte
unary_~ Char
unary_~ Int
unary_~ Long
unary_~ Short

作为Daniel和0__精彩回答的补充，我不得不说Scala理解某些符号的Unicode类比，所以代替

for (n <- 1 to 10) n % 2 match {
  case 0 => println("even")
  case 1 => println("odd")
}

你可以这样写

for (n ← 1 to 10) n % 2 match {
  case 0 ⇒ println("even")
  case 1 ⇒ println("odd")
}

Regarding :: there is another Stackoverflow entry which covers the :: case. In short, it is used to construct Lists by 'consing' a head element and a tail list. It is both a class which represents a cons'ed list and which can be used as an extractor, but most commonly it is a method on a list. As Pablo Fernandez points out, since it ends in a colon, it is right associative, meaning the receiver of the method call is to the right, and the argument to the left of the operator. That way you can elegantly express the consing as prepending a new head element to an existing list:

val x = 2 :: 3 :: Nil  // same result as List(2, 3)
val y = 1 :: x         // yields List(1, 2, 3)

这相当于

val x = Nil.::(3).::(2) // successively prepend 3 and 2 to an empty list
val y = x.::(1)         // then prepend 1

作为提取器对象的用法如下:

def extract(l: List[Int]) = l match {
   case Nil          => "empty"
   case head :: Nil  => "exactly one element (" + head + ")"
   case head :: tail => "more than one element"
}

extract(Nil)          // yields "empty"
extract(List(1))      // yields "exactly one element (1)"
extract(List(2, 3))   // yields "more than one element"

这看起来像一个运算符，但它实际上只是另一种(更可读的)书写方式

def extract2(l: List[Int]) = l match {
   case Nil            => "empty"
   case ::(head, Nil)  => "exactly one element (" + head + ")"
   case ::(head, tail) => "more than one element"
}

你可以在这篇文章中阅读更多关于提取器的信息。

你可以先根据某些标准对它们进行分组。在这篇文章中，我将只解释下划线字符和右箭头。

_._ contains a period. A period in Scala always indicates a method call. So left of the period you have the receiver, and right of it the message (method name). Now _ is a special symbol in Scala. There are several posts about it, for example this blog entry all use cases. Here it is an anonymous function short cut, that is it a shortcut for a function that takes one argument and invokes the method _ on it. Now _ is not a valid method, so most certainly you were seeing _._1 or something similar, that is, invoking method _._1 on the function argument. _1 to _22 are the methods of tuples which extract a particular element of a tuple. Example:

val tup = ("Hallo", 33)
tup._1 // extracts "Hallo"
tup._2 // extracts 33

现在让我们假设函数应用程序快捷方式的用例。给定一个将整数映射到字符串的映射:

val coll = Map(1 -> "Eins", 2 -> "Zwei", 3 -> "Drei")

Wooop, there is already another occurrence of a strange punctuation. The hyphen and greater-than characters, which resemble a right-hand arrow, is an operator which produces a Tuple2. So there is no difference in the outcome of writing either (1, "Eins") or 1 -> "Eins", only that the latter is easier to read, especially in a list of tuples like the map example. The -> is no magic, it is, like a few other operators, available because you have all implicit conversions in object scala.Predef in scope. The conversion which takes place here is

implicit def any2ArrowAssoc [A] (x: A): ArrowAssoc[A] 

其中ArrowAssoc有->方法，用于创建Tuple2。因此，1 ->“Eins”实际上是调用Predef.any2ArrowAssoc(1).->(“Eins”)。好的。现在回到带有下划线字符的原始问题:

// lets create a sequence from the map by returning the
// values in reverse.
coll.map(_._2.reverse) // yields List(sniE, iewZ, ierD)

这里的下划线缩短了以下等效代码:

coll.map(tup => tup._2.reverse)

注意map的map方法将key和value的元组传递给函数参数。由于我们只对值(字符串)感兴趣，所以我们使用元组上的_2方法提取它们。

只是为其他精彩的答案锦上添花。Scala提供了两个经常被批评的符号操作符，/:(foldLeft)和:\ (foldRight)操作符，第一个是右关联操作符。所以下面三个语句是等价的:

( 1 to 100 ).foldLeft( 0, _+_ )
( 1 to 100 )./:( 0 )( _+_ )
( 0 /: ( 1 to 100 ) )( _+_ )

就像下面这三个:

( 1 to 100 ).foldRight( 0, _+_ )
( 1 to 100 ).:\( 0 )( _+_ )
( ( 1 to 100 ) :\ 0 )( _+_ )

这里有很好的详尽的答案。

对我来说，关键的一点是，这有两类

op提到的符号是scala sdk中的函数名。在scala中，使用这些字符(包括unicode字符)来编写函数名是合法的。这将是一个很长的列表，试图从sdk中提到所有已经在其他答案中提到的问题

还有一些符号不是函数名，而是语言语法本身的一部分，如=>，_或操作符，如&&，||等。