这是我在运行pod安装或pod更新后得到的消息:

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig` in your build configuration (`Flutter/Debug.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig` in your build configuration (`Flutter/Release.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `Runner` to `Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig` or include the `Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig` in your build configuration (`Flutter/Release.xcconfig`).

下面是我解决这个问题的方法:

将方案添加到项目“Runner”下的Podfile

project 'Runner', {
  'Debug' => :debug,
  'Debug-staging' => :debug,
  'Profile' => :release,
  'Profile-staging' => :release,
  'Release' => :release,
  'Release-staging' => :release,
}

进入ios/颤振/调试。Xcconfig和include

#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.debug-staging.xcconfig"

进入ios/Flutter/Release。Xcconfig和include

#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.release-staging.xcconfig"
#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.profile-staging.xcconfig"

颤振清洁 删除podfile.lock 酒吧得到 圆荚体安装

你还应该确保在Podfile的根目录中没有pod，你应该像这样定义在许多目标中使用的所有pod:

def shared_pods
  pod 'ReactiveCocoa', '~> 2.5'
end
target 'app' do
  shared_pods
  pod 'RestKit'
end
target 'tests' do
  shared_pods
  pod 'OCMock'
end

您还可能需要删除libPods。libPods-app. a和libPods-app。A从目标依赖项，执行一个清洁，然后运行pod安装再次。

在仔细阅读错误消息后，我修复了我的问题:

[!CocoaPods没有设置项目的基本配置 因为您的项目已经有一个自定义配置集。为了 CocoaPods集成工作的全部，请任意设置基础 目标Runner的配置到目标支持文件/ pod -Runner/Pods-Runner.profile。xcconfig或包含目标支持文件/Pods-Runner/Pods-Runner.profile。构建中的Xcconfig 配置(颤振/ Release.xcconfig)。

解决方案

打开Xcode，将Runner Info Base Configurations更改为 Pods-Runner.profile.xconfig有关。 Xcode辞职 终端:从ios项目文件夹运行pod deintegrate 验证pod已移除 项目已经解体。项目中没有CocoaPods的痕迹。 注意:引用Pods项目的工作区仍然存在。 终端:在ios项目文件夹中运行pod install

(来自原文- BAD)

(到此GOOD设置)

笔记

我还没能用第二种方法解决这个问题 建议将xconfig文件包含在 颤振/释放。Xcconfig配置文件中提到的 错误消息。

我也遇到了同样的问题，但是在Xcode 6.1.1中-为我修复它的是将两个pod相关目标的配置文件设置更改为None，然后再次运行pod install。

通过选择项目(而不是目标)，然后选择Info选项卡，可以找到配置文件设置。

别瞎捣鼓了，重置。

循序渐进的

显示项目导航器 选择项目 选择信息 在Configurations中，选择每个目标，一次一个(Debug, ApplicationUnitTest, Release，等等)，对于每个目标，将configuration设置为None。 确保“基于配置文件”为每个配置读取0配置集或无配置集。这是关键所在。 Xcode辞职 rm -rf Pods/ Podfile。锁;圆荚体安装

一旦你允许pod安装在第7步中发挥它的魔力，你就可以使用自定义配置并更改配置。

也遇到了同样的问题。它可以建立在模拟器上，但不是在我的设备上。没有一个答案能帮我解决这个问题。以下是我将一些答案拼凑在一起的方法:

Changed my pods file to use a specific target: target :MyProject do pod 'AWSCognitoSync' pod 'Facebook-iOS-SDK' end Ran pod install That gives an error: [!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `MyProject` to `Pods/Target Support Files/Pods-MyProject/Pods-MyProject.debug.xcconfig` or include the `Pods/Target Support Files/Pods-MyProject/Pods-MyProject.debug.xcconfig` in your build configuration. Go Project settings and click on Info tab. There will be an error where it cannot find the Configuration file. Set it to "None" for Debug and Release. Run pod install yet again Clean and build. This works.